Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number FE443050303. This is the Fulton A frame coupler. The A frame coupler is sturdy and very simple to use. It's going to provide your attachment point for your two and five sixteenth inch hitch ball. It's going to be made from a steel construction. It's going to have a black primed finish on it and this is a weld on design.
Right here, you're going to have your low profile latch. It's very easy to use, offers a nice, sleek appearance. In order to open up the mechanism here in the socket to receive your hitch ball, flip the latch up and then pull it back. Then, it's going to remain open, that way you can make your connection. See how that opens up the mechanism right there Then, to close it, simply lift it up and push it forward and it's going to drop back down and then that closes the mechanism around the hitch ball. It's going to have a small pin hole located in the latch, that way you can install a coupler lock system or a coupler pin.
That is going to be sold separately. The diameter of that hole's going to measure about five sixteenths of an inch and then when choosing a coupler pin or a coupler lock, you need to make sure that it has a span or usable pin length of about seven eighths of an inch. That's about the width of that latch right there. We're also going to have the built in jack attachment area. This is going to provide a convenient location for mounting your A frame utility jack. The large hole is going to give us a diameter, looks to be about two and five sixteenths of an inch, so that's going to be perfect for jacks that have a diameter on the outer tube of two and one quarter of an inch.
These mount holes are going to be separated on center. This one's about three and three sixteenths of an inch. This one right here is going to be about two and fifteen sixteenths of an inch. It's going to be the same for that measurement there. Now, a lot of those holes on your standard A frame jacks are going to have elongated holes, so this hole separation is designed to fit your standard three inch mount pattern for A frame jacks. Again, this unit's going to feature a nice steel construction.
You also got the lip that goes around the socket right here so potentially some of those socket locks that are out there on the market to help protect your unattended trailer, some of those would fit on this unit. You just have to check out those and see if they would fit on this particular coupler. Again, it is a weld on design. This is designed to fit the industry standard fifty degree A frame trailer frames. Your ball size on this unit's going to be two and five sixteenths of an inch and the capacity of this coupler is going to be ten thousand pounds. If we take a look at the overall length, measuring from the very front to the very back, we can see there that it's going to give us a measurement that looks to be about twelve and three quarters of an inch. That's going to do it for our review of part number FE443050303.
Exactly what I wanted
Nice hitch exactly what I needed
ITS NOT INSTALL YET
Delivery on schedule and is exactly as advertised.
Love it
Working great!!
they look like the picture
strong and works great. only complaint is won't lock open.
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.