Vehicle Style: 5-1/2 Foot Bed Change
Fifth Wheel Hitch: BWRVK3255
Price: $799.00
Installation Rails: BWRVK2404
Price: $260.00
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
2010 Ford F-150 Trailer Wiring
Required Accessory:
Sidewinder King Pin is required with this short bed truck
Installation Notes:
Custom Install Kit BWRVK2404
Above Bed Rails
4 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Patriot hitch is compatible with Sidewinder products, but requires the use of custom wedge SWW-06, which is sold separately
Tech Tip:
Please refer to our Sidewinder FAQ page for a measurement formula to ensure cab clearance with your trailer.
More Information >Fifth Wheel Hitch: BWRVK3255
Price: $799.00
Installation Rails: BWRVR3201-00
Price: $275.46
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Semi-Custom Install Kit BWRVR3201-00
Above Bed Rails
4.5 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Patriot hitch is compatible with Sidewinder products, but requires the use of custom wedge SWW-06, which is sold separately
Tech Tip:
Please refer to our Sidewinder FAQ page for a measurement formula to ensure cab clearance with your trailer.
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...The OEM prep package consists of 4…
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…
view full answer...The head alone for the…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...As long as the RBW…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...Because your trailer has a Turning Point pin box and your Ram has a…
view full answer...To get the…
view full answer...