See what our Experts say about this PullRite 5th Wheel Hitch

• Will PullRite SuperGlide Hit Tailgate on 2025 GMC Sierra 2500
  Hey Steve! The PullRite SuperGlide # PUL83RR will not contact the tailgate on your 2025 GMC Sierra 2500. They have tested this extensively and said making contact and causing damage is not a concern. This is a really great hitch and autoslide is the way to go. One thing you will need to do is identify the pin box on your 2025 Cougar 29RLI since a capture plate is required for this 5th wheel hitch. Once you have identified it you can choose from the following: -PullRite SuperGlide Quick...
  view full answer...
• Recommended 5th Wheel Hitch for 2025 GMC Sierra 2500 Towing 2021 Jayco North Point 310RLTS
  Hey Brent! I do recommend using a slider to make sure you have clearance on those turns. The only exception is if you have a rotating pin box. If you don't mind a manual slider where you have to get out and engage the lever the best option is the B&W Companion # BWRVK3775. If you want an auto-slide then I recommend the PullRite SuperGlide # PUL83RR. This will also require a capture plate so you will need to identify your pin box to choose the right one. If you can send me the serial number...
  view full answer...
• Hitch Height of PullRite SuperGlide 5th Wheel Hitch for Chevy/GM Factory Prep Package
  Hey Cosmo, thanks for reaching out! The PullRite SuperGlide 5th Wheel Hitch # PUL83RR has a 18-3/8" hitch height, so as long as your cover doesn't sit lower than that to your 2023 Silverado 2500 bed then this will fit just fine. Tonneau covers sit at varying heights though, which is why I can't answer this specifically. This hitch does require a capture plate, so if you can let me know what pin box your 5th wheel is equipped with, I'd be more than happy to tell you what capture plate...
  view full answer...
• Recommended Automatic Sliding 5th Wheel Hitch for 2025 Chevy Silverado 2500
  Hi John; do you have the OEM prep package (puck system) in your 2025 Silverado 2500? Assuming you do, we have the following available with autoslide: -Demco Autoslide 5th Wheel Hitch w/ Slider # DM79GV -PullRite SuperGlide 5th Wheel Hitch for Chevy/GM Factory Prep Package # PUL83RR Between the two I prefer the Demco since the hitch height setting can be adjusted and PullRite height is fixed. Both are high quality hitches so you really can't go wrong with either one. The PullRite will...
  view full answer...
• Correct Capture Plate for 2025 Silverado 2500 With PullRite SuperGlide 5th Wheel Hitch
  Hi Eric; the correct capture plate for the PullRite SuperGlide 5th Wheel Hitch # PUL83RR depends on the pin box on your 5th wheel. The manufacturer can identify it if you get the serial number off of the pin box sticker or you can measure the bolt pattern. I attached an article below which explains how to measure. You can also add your serial number to the comments below and I can help you identify it. Once you know what pin box you have you can choose from the following: -PullRite SuperGlide...
  view full answer...
• Is there an Adapter to Mount a PullRite Hitch w/the GM Puck System to a Truck w/out the Puck System?
  Hey Alfonso, congrats on the new truck. Sorry but there's no bracket or adapter that will make a PullRite hitch like item # PUL96ZR or item # PUL83RR that's designed for the 2025 GM puck system, work with another mounting system. The bases in the PullRite hitches are built into the structure so you can't swap them out like other brands. There's no way to add a factory puck system to your 2018 that will match up with the PullRite you have either. Do you have any kind of 5th wheel rails...
  view full answer...
• PullRite SuperGlide for 2025 Chevy Silverado 3500 With Prep Package
  Hey Richard! The PullRite SuperGlide 5th Wheel Hitch for Chevy/GM Factory Prep Package # PUL83RR is the correct version of the 4500 for your 2026 Silverado 3500 with the factory prep. You will also need a capture plate, which is pin box dependent. Do you know what kind of pin box you have? For example, if you have a 12-3/4" wide Lippert 1621 you need the PullRite SuperGlide Quick Connect Capture Plate # PUL96RR. If you aren't sure I would be happy to look it up if you can give me the...
  view full answer...
• Which MORryde Goosetec Fits Alliance Avenue ML23
  Hey George, I looked up your Alliance Avenue ML23 and what I found was that it uses the Lippert Rhino Box so based on that and the GVWR you have the correct MORryde Goosetch would be the part # MR64MV. If you were wanting to stick with a fifth wheel hitch setup the Pullrite SuperGlide part # PUL83RR would be a great option. It would slide far enough to allow you to make a 90 degree turn with your 2026 GMC Sierra 2500. On the newer GM trucks they actually moved the rail kits a little further...
  view full answer...
• Weight of PullRite SuperGlide 5th Wheel Hitch for Chevy/GM Factory Prep Package
  Hi Phil; the head of the PullRite SuperGlide 5th Wheel Hitch for Chevy/GM Factory Prep Package # PUL83RR weighs 40 lbs and the base weighs 169 lbs for a total of 209 lbs. This is confirmed to fit your 2025 Chevy Silverado 2500 short bed with the OEM prep package.
  view full answer...
• Which PullRite SuperGlide 5th Wheel Hitch Fits 2025 Chevy Silverado 2500 With OEM Puck System
  Hi Jake; the PullRite SuperGlide 5th Wheel Hitch # PUL83RR is what you need for your 2025 Chevy Silverado 2500. This will drop right into the pucks from your OEM prep package. You will also need a capture plate like the # PUL46RR. The right one depends on your pin box. This fits the Lippert 1621/1116/1716 pin boxes so if you have a different pin box please let me know in the comments below and I'll help you find the right capture plate for your 5th wheel.
  view full answer...
• Can Pullrite Superglide for 2018 GMC Sierra Adapt to Fit 2025 Silverado
  Hey Michael, there isn't a way to adapt your Pullrite 2715 to fit the OEM pucks of your 2025 GMC Sierra 2500 so you would need the Pullrite that fits your truck pucks as-is with the part # PUL83RR.
  view full answer...
• How to Know if the PullRite SuperGlide 5th Wheel Hitch is the Right Height for Your Trailer
  Great question, Rick! The fixed 18-3/8" height of the PullRite SuperGlide # PUL83RR is really the only downside to this hitch, but you'll still be able to adjust the height of your pin box which is why this 5th wheel hitch is still compatible with a lot of towing setups out on the road. Here's how you can verify if this will work with your 5th wheel trailer: 1. Park your truck and trailer on level ground and then uncouple. 2. Measure from the ground to the bed of your truck (B). 3. Add...
  view full answer...
• Recommended OEM Puck Adapter for Pullrite 2900 Series Hitch on a 2025 Chevy Silverado 2500
  Hey Jeff! Since it looks like the Pullrite 2900 is designed to work with industry standard rails, you'll just need the Adapter Rails for Curt 5th Wheel Hitch # C88KR. This adapter will drop into your OEM pucks and provide your truck with the ISR mounts so you can use your hitch! If there is anything else I can do for you, please feel free to drop a comment and let me know!
  view full answer...
• Auto Sliding 5th Wheel Hitch For A 2025 Chevy 2500 Short Bed
  Hi Dan! I do have an option for a 16k auto-slide 5th wheel hitch that will fit your 2025 Chevy 2500 short bed, but I am not aware of Curt making an auto-sliding hitch. Did you by chance mean PullRite? If you did, we have the PullRite SuperGlide 5th Wheel Hitch for Chevy/GM Factory Prep Package - 24K # PUL83RR, but not the 16k at the moment. For that, you would need the following two parts: Curt Adapter Rails - Ford and Chevy/GMC Towing Prep Package # C88KR PullRite SuperGlide 5th Wheel...
  view full answer...
• Can PullRite SuperGlide 5th Wheel Be Used With Morryde Cushioned Pin Box?
  Good morning Steve, you can certainly use the PullRite SuperGlide 5th Wheel Hitch for Chevy/GM Factory Prep Package # PUL83RR with a MORryde Cushioned pin box like # MR84VR or other models when used in conjunction with the correct adapter plate: MORryde Pin Box Adapter for PullRite SuperGlide Hitch # MR57ZR. Nice truck and RV by the way! Have you been searching for a new setup for awhile?
  view full answer...
• Can A Teflon Disc Or Lube Plate Be Used With PullRite Capture Plate?
  Hello Micah, thanks for reaching out. No, you would not want to use a teflon disc or lube plate with a PullRite capture plate like part # PUL92RR. Like you said, it would interfere with the operation of the capture plate. Which PullRite hitch and pin box do you have? Let me know.
  view full answer...