Replacement Hinges/Struts for a Sears Sport SV Cargo Box

Question

Question:

I read that this strut will replace the current struts on a Sears sport 20-sv. I am wondering if this strut works for both sides or is there a left and right side?

asked by: Michael N

1

Helpful Expert Reply:

There isn't a left and a right. There is just one strut that works on both sides. Replacement hinge or strut # TH14936 might be a tight fit since it is slightly different than the originals, which are no longer available, but it should still work. We have had customers use this hinge with success on the Sears Sport SV cargo box.

We have also had some customers experience difficulty closing the box because the spring tension is greater in strut # TH14936 compared to # TH14933. Both of these have the exact same dimension but # TH14933 is slightly easier to close for some people. You could use either one.

expert reply by: Michael H

1

Answer 1

I wish we could help but we don't have any recommended ways to help allow the lid of your box to open higher.

view full answer...

Answer 2

I spoke with my contact at Thule and was informed that for the Sears branded Sport 20-SV cargo box you would need to use hinge #TH14936. My contact also stated that both hinges should be changed at the same time for best performance. I have linked a…

view full answer...

Answer 3

If you are looking for replacement spring hinges for your Sears X-Cargo box, you will need a Replacement Spring Hinge #SR03810 for your single broken hinge. I went ahead and attached a picture of a Sears X-Cargo Box that has both hinges replaced with…

view full answer...

Answer 4

Thule manufactured the X Cargo boxes for Sears. According to my Thule representative, the actual metal hinges are part #SR03396, which are sold individually. The spring loaded lifter is the part #SR03810 you referenced. I've edited a diagram for…

view full answer...

Answer 5

Yes, the Replacement Spring Hinge #SR03810 is going to be the correct spring hinge for your grey and white Sears X-Cargo carrier. Using the picture you included I was able to verify that this was the correct part. I have included a review and picture…

view full answer...

Answer 6

We do offer a replacement Spring Hinge for the Sears X-Cargo Sport-20 rooftop boxes, part #TH14933. The part #TH14936 you referenced is not an ideal fit for your Sears X-Cargo Sport-20 due to the stiffness of the spring.

view full answer...

Answer 7

Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…

view full answer...

Answer 8

Thank you for the photo of the hinge you need to replace on your Sears X-Cargo Box. The replacement hinge you need is part #SR03810. This item is ordered individually so I recommend you check the other side to make sure it doesn't need to also be…

view full answer...

Answer 9

The replacement hinge compatible with the Sears X-Cargo Sport 20 cargo box is part #TH14936. This has a stronger spring than the original but will work for your cargo box.

view full answer...

Answer 10

The correct replacement hardware kit for your Sear X-Cargo box model 28-7271 is part #SR05587 on our site. We have confirmed with Thule that this works for your exact model.

view full answer...

Answer 11

To replace the mounting hardware on your Sears X-Cargo Sport 20 cargo carrier you can use the Replacement Hardware Kit #TH05603 to re-mount your cargo carrier on most factory and aftermarket roof rack crossbars. To replace the lock, you'll want…

view full answer...

Answer 12

X-Cargo Carriers, Karrite and SportRack share hardware, so part #SR05587 will work to replace your missing pieces.

view full answer...

Replacement Hinges/Struts for a Sears Sport SV Cargo Box

Product Page this Question was Asked From

Continue Researching