Replacement Hinges for Sears X-Cargo 18 Cubic Foot Roof Cargo Box

Question

Question:

Are Replacement Hinges Available for the Sears X-Cargo Model 28-727118 cu ft

asked by: Tony

0

Expert Reply:

Thule manufactured the X Cargo boxes for Sears. According to my Thule representative, the actual metal hinges are part # SR03396, which are sold individually. The spring loaded lifter is the part # SR03810 you referenced. I've edited a diagram for you that shows where these parts are located on the cargo box.

expert reply by: Mike L

0

click to enlarge

Answer 1

Hey Drew, you're probably having trouble with it because it's not meant for that box. You need to be using the Replacement Dual Force Strut for Thule Roof Box #TH14933 instead, which is the correct replacement.

view full answer...

Answer 2

If you are looking for replacement spring hinges for your Sears X-Cargo box, you will need a Replacement Spring Hinge #SR03810 for your single broken hinge. I went ahead and attached a picture of a Sears X-Cargo Box that has both hinges replaced with…

view full answer...

Answer 3

The hinges on the SportRack Vista XL Cargo Box, part #SR7018, are a spring assist hinge. It uses the Replacement Dual Force Strut, part #TH14933. I am including a link to a video review that will show how the hinge works. The #SR7018 cargo box has…

view full answer...

Answer 4

I spoke with my contact at Thule and was informed that for the Sears branded Sport 20-SV cargo box you would need to use hinge #TH14936. My contact also stated that both hinges should be changed at the same time for best performance. I have linked a…

view full answer...

Answer 5

Thank you for the photo of the hinge you need to replace on your Sears X-Cargo Box. The replacement hinge you need is part #SR03810. This item is ordered individually so I recommend you check the other side to make sure it doesn't need to also be…

view full answer...

Answer 6

We have other customers who have used the #03347 latch as a replacement on their X Cargo boxes (see photo), and it has worked just fine. Since your box is a little older, and appears to have used the metal latches, you might need to relocate the…

view full answer...

Answer 7

Yes, the Replacement Spring Hinge #SR03810 is going to be the correct spring hinge for your grey and white Sears X-Cargo carrier. Using the picture you included I was able to verify that this was the correct part. I have included a review and picture…

view full answer...

Answer 8

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be…

view full answer...

Answer 9

On cargo boxes like the Yakima RocketBox series the external hinges and most other components that are riveted into place at the time of manufacture are not user-replaceable. So this just means you might need to drill out the rivets on the bad hinge,…

view full answer...

Answer 10

Yes, you are going to be able to use the Replacement Foam Gasket #TH27PW on your Sears XCargo roof top cargo box.

view full answer...

Answer 11

So even though your Yakima SkyBox 18 #Y07336 or SkyBox21 #Y07337 has the diamond shaped hinges currently, those are an older model hinge that is no longer used by Yakima; you also won't be able to use the Replacement Front Lid Support 8870090…

view full answer...

Answer 12

For starters, there are a few different generations of the Yakima SkyBox 16 and I would need to know which one you have in order to recommend the correct replacement hinges. I called Yakima and they were not able to reference the part number you…

view full answer...

Replacement Hinges for Sears X-Cargo 18 Cubic Foot Roof Cargo Box

Products Featured in This Question

Continue Researching