Lift Kit Solution for 2003 Big Foot 25B21RB to Provide 2 inch Lift

Question

Question:

Im wanting to lift my 2003 Bigfoot 25B21RB tandem axle travel trailer. Im thinking of swapping the axle from underslung to overslung by installing a new spring perch. However, this will give me about 5 of lift which is more than I want. I currently have EQ-310 equalizers and 2 1/4 heavy duty shackles. Can I change to a EQ-104 equalizer with the same springs, hangers and shackles? I figure by doing so it would lower it by 2, giving me an overall lift of 3, which is about what I want. Thanks.

asked by: Stuart M

0

Expert Reply:

Hey Stuart, we actually have just what you are looking for with the Correct Track tandem axle lift kit part # RR23QX which will give you a lift of 2-1/4 inches like you are looking for. This basically adds spacers to the hangers of your current suspension which provides the lift.

expert reply by: Jameson C

0

Stuart

9/30/2024

So is that a no to changing to EQ-104 equalizers? Thanks.

Reply

Jameson C.

9/30/2024

@Stuart That wouldn't work as an effective way to lift the trailer since it wouldn't lift the side of the spring that attaches to the hangers.

Reply

Answer 1

Hey Scott yes, I recommend going with the Correct Track Trailer Alignment and Lift Kit #RR23QX. This kit will provide 1 1/4" or 2 1/4" of lift depending on how it's installed. This kit also works with tandem axle trailers and works with…

view full answer...

Answer 2

There are a couple of options to lift your 2024 Keystone Cougar 29rks depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and…

view full answer...

Answer 3

Hey Phil you can send those pictures to the email you receive this response and I will be happy to take a look at them. There's only going to be a couple of ways to lift your 2019 Keystone Cougar 29RKS though and it's going to be determined…

view full answer...

Answer 4

I don't know what axles you have on your trailer but if you look at the axle tag it will tell you this. If you can't comprehend the axle sticker then just send me a photo of this and I will be happy to do that for you. There are a few…

view full answer...

Answer 5

In order to lift your Keystone Cougar 29RES I recommend using this Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00 for 2-3/8" diameter axles. This is the most cost effective option we offer to lift a trailer and it is a very…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

Hey Kevin! I didn't see an order yet but it sounds like you already got some shocks based on your 2nd question. I went ahead and added it below your 1st question above. If you still need shocks you can use the Roadmaster Comfort Ride Shock…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Lift Kit Solution for 2003 Big Foot 25B21RB to Provide 2 inch Lift

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching