Can 5-Lug Hub Be Upgraded to 6-Lug Hub
Updated 01/05/2026 | Published 09/19/2024
Question:
Can I fit /Or put on a six pin/lugged hub and drum on an axle that came with the five pin hub? Would you just recommend buying a heavier duty axel?
asked by: Jeff H
Expert Reply:
Hey Jeff, thanks for reaching out!
You can potentially swap out a 5-lug hub for a 6-lug hub, but it all depends on what bearings and seals your axle uses.
For example, 2,000 lb axle uses ither 4-lug or 5-lug hubs while a 3,500 lb axle is compatible with 5-lug or 6-lug hubs.
If you have a 3,500 lb axle then you should be able to use the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K but you'll want to verify that you have the following bearing and seal specs:
- Inner Bearing L68149
- Outer Bearing L44649
- Grease Seal Inner Diameter 1.719"
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Search Results: trailer tires and wheels
- Search Results: 205 75r15
- Search Results: bearing packer
- Video: Review of Lionshead Trailer Tires and Wheels - Wheel Only - LH78MR
- Search Results: dexter trailer hubs and drums
- Search Results: 5 on 4~1/2 inch trailer brakes
- Search Results: st235/75r15
- Search Results: provider tire
- Shop: Aluminum Siberian Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Gunmetal Gray
- Q&A: How to Tell if 3,500 Pound Dexter Torflex Axles Need to be Replaced
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Hub-and-Drum Assembly - 4.4K Axles - 6 on 5-1/2 - 10" Drum
- Video: Choosing the Right Trailer Tire: A Manufacturers Guide
- Video: An In-Depth Look at the Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Feature Breakdown: Aluminum Sendel Series T02 Machined Trailer Wheel
- Q&A: Does Maxxis ST205/75R15 Tire w/ 15" Wheel - 5 on 4-1/2 Come Pre-Mounted And Balanced
- Q&A: Can I Use 205/75R15 Tire w/ 15" Aluminum Wheel - 5 on 4-1/2 MXS67FR On 3,500lb Axle ?
- Q&A: How To Switch to 5 on 5" Bolt Pattern With Dexter 3,000 Lb Torsion Axle
- Q&A: Where Are The Taskmaster Wheels And Tires Made?
- Video: Ultimate Overview of the Dexter Trailer Axle w/ Electric Brakes
- Q&A: Does The 15" Lionshead Steel Spoke Trailer Wheel LH62VR Have An Offset?
- Q&A: Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
- Shop: Floor Mats
Jameson C.
1/5/2026
Hey Jeff, did you get a chance to check the bearing and seal sizes on your axle to see if the 6-lug hub and drum fit? Knowing how that worked out could really help others looking to upgrade from a 5-lug setup.