Replacement Hub for a Hub Stamped H1000 R
Question:
I have a boat trailer with a hub stamped H1000 R and 127 on the back. It’s 5x4.5 patterned. Looking for entire hub replacement kit, ideally progressed. The spindle is tapered and I believe the trailer is 3500lb.
asked by: Jason R
(click to enlarge)
(click to enlarge)
Expert Reply:
Thanks for the pictures! I would be happy to help you find the correct replacement hub for your trailer, but I need some more information. You will need to determine which inner and outer bearings your spindle uses as I was unable to find any information on a specific replacement hub for you and I can not tell from the pictures.
The easiest way would be for you to check the bearings for part numbers. If your bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers like item # PTW80157 to precisely measure your spindle according to the included diagram.
If you could comment below with the bearing numbers or spindle measurements I would be happy to recommend a replacement hub for you.
(click to enlarge)
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Search Results: bk2~100
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: How to Determine Correct Replacement For UFP H1377 Hub
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Race for LM67048 Bearing
- Shop: Timken Bearing Kit, LM67048 Inner/Outer Bearings, LM67010 Inner/Outer Race, 203013 Seal
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Shop: Trailer Hitch
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer brakes
- Article: Trailer Wiring Diagrams
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Search Results: trailer leaf springs
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Search Results: trailer tires and wheels
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Search Results: trailer hubs and drums
on Trailer Bearings Races Seals Caps
