Wiring Diagram for Lippert Stabilizer Jack # LC298707

Question

Question:

We need a wiring diagram for a fuse replacement that makes the lippert stabilizing jacks on the outside of the tongue of the camper work.

asked by: Sandra A

0

Expert Reply:

I have included a picture showing how the motor and switch wire up on the Lippert stabilizer jack # LC298707.

expert reply by: Jameson C

0

Diagram
(click to enlarge)

Answer 1

We have the 12k rated Equal-i-zer part #EQ37121ET which comes without a shank so that you could add the shank you'd need like the part #EQ90-02-4700 which fits a 2-1/2 inch hitch and has a 3 inch drop or part #EQ90-02-4900 which can do a 6 inch…

view full answer...

Answer 2

Yes, they do. The Blue Ox Sway Pro item #BLU54TR and item #BXW2003 are a couple of our most popular weight distribution systems that include the 2-1/2" shank. If you already have a weight distribution system, or want to go with a different…

view full answer...

Answer 3

I believe you are referring to the Lippert Components High-Speed Power Stabilizer Jack part #LC369774 that comes with the white switch part #LC144214. Lippert was not able to provide me a wiring diagram for the white switch but was able to give me…

view full answer...

Answer 4

Yes, I have attached the wiring diagram of the Replacement Electric Jack Switch with Harness #LC387874 for you to reference. Basically the Blue wire goes to a 6A auto reset breaker, like part #LC134181, which then goes to the positive circuit for…

view full answer...

Answer 5

We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.

view full answer...

Answer 6

On the Lippert Power Stabilizer Jack #LC298707 for your Forest River Evo Trailer Trailer there should be a 20 amp (or higher) fuse/breaker located inline with the red power wire coming from the switch before it reaches the battery. Check to make sure…

view full answer...

Answer 7

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 8

In regards to the Curt Front Mount Trailer Hitch Receiver part #C52NR which is a fit for a 2022 GMC Sierra 2500, the tow hooks do not need to be removed. I have attached a photo below which shows both the trailer hitch and tow hooks in place. I have…

view full answer...

Answer 9

Most likely what you need is the part #LC138445 as this one tends to be the one that works for most people unsure of what they have. I can't find the number you referenced though. Do you happen to see "Klauber C-800" anywhere on the…

view full answer...

Answer 10

The replaceable parts for the Lippert PSX2 stabilizers include the following: Switch and Harness - #LC387874 Switch Hatch Box (White) - #LC134025 If you're needing to replace the entire unit we don't have the PSX2 but we do have the Lippert…

view full answer...

Answer 11

If you are needing to replace the stabilizer jacks on your 2011 K-Z Durango 1500, we will have 2 different styles. The Stallion Stabilizer Jacks #288-01892-2 are a drop down style so they are easy to use, but they are only rated up to 1,000 pounds…

view full answer...

Answer 12

The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks #ARK34FR are 16.6" collapsed and 23.6"…

view full answer...

Wiring Diagram for Lippert Stabilizer Jack # LC298707

Product Page this Question was Asked From

Continue Researching