Trailer Left Turn/Stop Signal Fuse Location On A 2018 Chevy Silverado 2500

Question

Question:

I have a 2018 2500 silverado ,I tow a camper, or a utility trailer andneither on the Left blinker isnt working what fuse should I check and is it under the hood? Thanks ,

asked by: Wally

0

Expert Reply:

The left trailer stop/turn mini fuse in your 2018 Chevy Silverado 2500 can be found in the engine compartment fuse block at position 14. You can test the fuse with a tester # PTW2993 on both sides to see if it's blown and in need of replacement.

expert reply by: Kevin C

0

Answer 1

The trailer running light fuse of your 2018 Chevy Silverado is in the number 15 slot of the fuse box under the hood of your truck. I attached a picture with the location pointed out.

view full answer...

Answer 2

According to my research the following wires for the 7-Way on your 2019 Chevy Silverado 2500 should carry the following functions: Green OR White/Green - Reverse White - Ground Blue - Brake Controller Green OR Green/Purple - Right Turn/Stop Red/Black…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Bill, so the hitch ( #C98CR ) you mention will fit a 2025 Equinox, but right now there are no custom fit wiring harnesses. So, your only option on that front would be to use a universal harness like the Curt Powered Tail Light Converter with…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hello Dan, thanks for reaching out. The Firestone #F2550 for the 1999 Ford F-250 2WD will be compatible with the B&W Turnoverball gooseneck hitch. The brackets are designed specifically to be compatible with in-bed hitches like the B&W, so if…

view full answer...

Answer 8

Appreciate the purchase and we have exactly what you need. Since the Draw-Tite Max-Frame Trailer Hitch Receiver #76034 for your Ford Explorer comes with a mounting tab for a bracket, all you need to mount the T-One Vehicle Wiring Harness with 7-Way…

view full answer...

Answer 9

There are two ways to add a hitch to your 2013 Ford F-150 that already has a factory hitch installed. The first is to add the TorkLift #TLF1005H. This is only designed for short bed models and trucks with a factory hitch rated for 10,500 lbs. It also…

view full answer...

Answer 10

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Answer 11

For your 2010 Dodge Ram 3500 you're going to have a couple of options to choose from. - If you have a crew-cab 4x4 with a single rear wheel and a 6-1/2' bed then you're going to need the TorkLift Custom Frame-Mounted Camper Tie-Downs…

view full answer...

Trailer Left Turn/Stop Signal Fuse Location On A 2018 Chevy Silverado 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching