How To Measure For Hub-Face And Spring Center Measurements On An Axle
Question:
How exactly are the 48 and 60 small trailer axels measured? That is, from what point to what point? Thanks
asked by: Jeff H
Helpful Expert Reply:
All axles, including the Trailer Axle with Idler Hubs # e25GR you referenced, are measured by capacity and two measurements (hub-face to hub-face & spring center to spring center). The hub-face to hub-face measurement ensures that your wheels will sit in the same position as they did with the previous axle so that they won't rub against the frame of the trailer. The spring center measurement lines the spring seats on the axle up with the hangers/center of the frame so that you can mount the axle.
You'll need an extra set of hands to help hold the tape measure so you can get these measurements, but it's pretty straightforward. Don't forget to determine the axle capacity needed as well so that you can get the correct replacement for your trailer. If you need any more help then you can submit another question or call us at 1-800-940-8924 and we'd be happy to walk you through the process.

Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Search Results: boat trailer spindles
- Video: Trailer Axle with Idler Hubs Spec Review
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Video: Checking Out the Trailer Axle with Idler Hubs
- Video: Ultimate Overview of the CE Smith Replacement U-Bolt w/ Nuts for 1-3/4" Round Axles
- Q&A: What Comes with Trailer Axle # e25GR
- Search Results: 60" axle
- Shop: Replacement U-Bolt with Nuts for 1-3/4" Round Trailer Axles - 3/8" Diameter
- Shop: CE Smith Replacement U-Bolt w/ Nuts for 1-3/4" Round Axles - 3/8" Diameter - Galvanized
- Shop: Replacement U-Bolt with Nuts for 1-3/4" Round Trailer Axles - 3/8" Diameter - Zinc Plated
- Video: A Closer Look at the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: 13 trailer tire
- Q&A: Recommended Axle Installation with Spring Seats Too Wide for Spring Locations
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Q&A: How to Determine Spring-Center and Hub-Face Measurements when Building a Trailer
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Q&A: What do the Hub Face and Spring Center Measurements Mean for an Axle
- Video: All About the Bulldog Collar-Lok Coupler w/ Pin
- Search Results: bulldog hitch
- Search Results: trailer suspension parts
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer leaf springs
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Article: How to Accurately Measure Trailer Leaf Springs