Solution for Replacement Wheels With 4 on 4.5 Bolt Pattern

Updated 08/23/2023 | Published 08/22/2023

Products Featured in This Question

Steel Spoke Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 - Galvanized

(703)

$57.57

Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased

(1407)

$40.58

Replacement Trailer Hub Bearing - L44643

(2037)

$4.77

Question:

Can you get 13 or 14 inch wheels with 4 on 4.5 ?

asked by: Gregory A

Expert Reply:

Wheels with a 4 on 4.5 bolt pattern are typically found on old passenger vehicles. We have found at least one instance where they were on old trailer from the 60's, but in general that is not a bolt pattern found on trailer wheels. Since these are no longer being made, your best option is to replace the hub, possibly the hub and axle.

If this is an old trailer, which I suspect it is, it is very likely a hub is not available. A lot of older spindles are shorter than modern spindles which means that your best bet would be a replacement axle. You will need to know the axle capacity as well as the length of the axle to find a replacement. Once you have a modern hub with a 4 on 4 bolt pattern you could use a wheel like the # AM20224 you were looking at.

If it is not an old trailer, you can find a replacement hub once you identify your bearings. For example, if you have # L44643 inner and outer bearings you could use the # AKIHUB-440-2-1K. This is designed to fit a 2,000 lb axle and has a 4 on 4 bolt pattern.

I have attached a link below to all of our axles, along with a helpful video which shows how to measure for your reference.

expert reply by: Robin H