Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
Updated 08/17/2024 | Published 08/11/2023
Products Featured in This Question
Question:
Hello Im looking for a set of new hubs for an old balko trailer, outer bearings are 3/4 inch and inner appear to be 1 1/4 max. I found out that 1 3/8 is way too big for the inner. Naturally the 1 1/16 was too large for the outer. Do you guys have anything for this? Ultimately looking for a 5 lug 4.5 center, but Ill take whatever I can get so I can get new wheels. Currently the hubs need new bearings, but the the lugs are 5lug with 4.75 center. Finding smaller wheels than 15 inch seem to be elusive. Any thoughts? Id prefer to fix the trailer vs scrap it. Thank you for your time.
asked by: Matt D
Expert Reply:
I do have one hub that uses a .75" ( # LM11949) outer and a 1.25" ( # LM67048) inner bearing. This bearing combination is uncommon these days, but we have the hub # DX22XR. This is a 5 on 4-1/2" idler hub for a 2,500 lb axle. Bearings, seals, races, grease cap and lug nuts are all included. We also have a few sizes of wheels that will go with this;
15" wheel - # AM20422
14" wheel - # AM20365
13" wheel - # AM20253
12" wheel - # AM20132
We can also provide tires for any size trailer wheel if you are in need.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: t1721400042
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: calkins trailer parts
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: t1 connector
- Search Results: trailer wiring
- Search Results: dx22xr
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Video: Complete Breakdown of the Replacement Step, Motor, and Control for Kwikee RV Electric Steps
- Shop: Replacement Trailer Hub Bearing - LM11949
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Search Results: lm67048
- Video: All About the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Q&A: Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle
- Q&A: Replacement For Titan Trailer Hub 17214
- Q&A: Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Video: Hands-On with the Karrier ST215/75R14 Radial Trailer Tire with 14" Aluminum Wheel
- Search Results: 15123
- Shop: Trailer Wiring
- Q&A: Replacement Bearing For Timken 15123 Trailer Hub Bearing
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Video: Feature Review Timken Grease Seal
- Article: How to Measure a Trailer Axle
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Shop: Brake Controller
Marvin
8/17/2024
dx22r hub is the size I need, 3/4-1 1/4 axle, but I have one I ordered and it is to 4 1/16 tall. I need one shorter than that. can u tell me the measurments?