Correct Replacement Fan Motor and Fan for a Fan-Tastic Vent 6500

Question

Question:

I have 2004 Newmar Scottsdale motorhome, but the fan-tastic vent wont run, I can hear the buzzing and the fan wont run. Checked the labels of the fan, the only information I can find is the motor model 6500, date 09-03. And on the label of the Fan-tastic vent, there is a LIsting No. 15509 under Testing Engineers International. My question is Can I use this Part # FVk8017-00 to replace my existing vent in order to make it work?

asked by: Greg S

1

Helpful Expert Reply:

Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 you're looking at is the correct fan motor kit for your Fan-Tastic Vent Roof Vent 6500.

This kit includes a bow tie bracket, a new motor, and a new fan blade.

expert reply by: Bryce D

1

Answer 1

When repairing or replacing the rocker arm like #FVK8011-05 on your Fan-Tastic Roof Vent, you shouldn't need to remove the entire fan assembly. Working from inside the trailer/RV and looking up into the unit, you should be able to first remove…

view full answer...

Answer 2

The Camco vent cover is not intended to work with the Fan-Tastic vents, so I am sorry that you had someone install an inefficient and less than ideal product saying they were compatible. You should have had the Fan-Tastic Vent Ultra Breeze Trailer…

view full answer...

Answer 3

You won't need to know the brand/model of your RV ceiling vent but you will need to know the type of hinge that's on the vent cover in order to determine the correct replacement; unfortunately this isn't information that is uniform on…

view full answer...

Answer 4

The B&W Flatbed Adapter #BWRVK3050 will fit into any B&W Turnoverball gooseneck like the #BWGNRK1394. Depending on your truck a better option might be to use the B&W Gooseneck Hitch for Flatbeds #BWGNRK1500. It installs by welding to the…

view full answer...

Answer 5

The length of the threaded portion of the cylinder is 1/2". However, when you put the rubber washer on the cylinder and the back nut on as little as possible, the remaining clearance is 1/4". I have attached two pictures showing this.

view full answer...

Answer 6

The Fan-Tastic Create a Breeze Fan 8100TS has been discontinued by the manufacturer. We do not have replacement parts available for this model outside of the Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans, #FVK8017-00. I recommend…

view full answer...

Answer 7

I spoke with Dometic and they reccommend that you triple check that you have followed the instrucitons exactly they way they are as there is a jumper cable that is meant to be installed if you have the pancake style motor, and if left out you will…

view full answer...

Answer 8

Since the Fan-Tastic Vent Model 6500 is no longer in production, your best option is to upgrade to the 7350 series by way of the Fan-Tastic Vent 7350 Series Upgrade Kit #FV807359. This kit includes the screen assembly, the powered lift, and the…

view full answer...

Answer 9

The only difference I'm seeing between the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit #FV807357 and Kit #FV807359 is that the 57 has small cutouts at the corners while the 59 has squared corners. Aside from that these are both labeled to work…

view full answer...

Answer 10

I do have an option for you but there isn't an upgrade kit for a MaxxAir Roof Vent Fan that would allow you to use a wireless remote. Instead, your only option is an actual replacement the MaxxFan Deluxe Roof Vent part #MA00-07000K for white or…

view full answer...

Answer 11

If the lift motor will no longer operate with the controller but does when you apply direct 12 volt power then that tells me there is an issues with the control board. The only way to replace the control board on the Fan-Tastic Vent Roof Vent part…

view full answer...

Correct Replacement Fan Motor and Fan for a Fan-Tastic Vent 6500

Product Page this Question was Asked From

Continue Researching