How to Find Correct Replacement Fenders for an Aluma MC10 Motorcycle Trailer

Question

Question:

I am looking for a pair of fenders for an aluma mc 10 trailer with 13” wheels in a gray color I seen some on your website but not sure if they are wide enough as the tires are a couple of inches away from the trailer bed Thanks

asked by: Harley H

1

Helpful Expert Reply:

We don't have any replacement fenders that are direct replacements for your trailer as we do not carry any Aluma Trailer products.

With that said, the only way you'd get a replacement fender for your trailer apart from reaching out to the manufacturer for a direct replacement, is to measure your current fender and take note of how it attaches and then find one that fits the bill.

For instance, since you mentioned you have 13" wheels you could potentially use the Single Axle Trailer Fender w/ Backing Plate # HP97FR which will work with 13" to 14" wheels, and measures 28" long x 7-3/4" wide x 10" tall.

expert reply by: Bryce D

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.

view full answer...

Answer 7

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 8

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 9

I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…

view full answer...

Answer 10

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 11

Hi Leo; I would start by checking to see if there are axle tags on the axles. They will probably have the capacity on them or at least a serial number the axle manufacturer could use to identify the axle. If the trailer manufacturer is still in…

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

How to Find Correct Replacement Fenders for an Aluma MC10 Motorcycle Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching