Does the First Generation Voyager WiSight Camera Work W/ The Voayger WiSight 2.0 Monitor?

Question

Question:

Hi, Is the VOYAGER WIRELESS WISIGHT 2.0 monitor compatible with the VOYAGER WIRELESS WISIGHT camera prior gen?

asked by: Steve

0

Expert Reply:

Unfortunately, the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA27FR is only compatible with the Voyager WiSight 2.0 Wireless systems.

Since the first generation monitors are now obsolete you'd have to upgrade your entire camera system to the newer Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV # ASA37YR.

expert reply by: Bryce D

0

Henry S.

7/22/2024

Would the existing wiring of a first generation Voyager in an Airstream 2021 be compatible with a 2.O Voyager unit?

Reply

Bryce D.

7/23/2024

@HenryS Unfortunately, the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA27FR is only compatible with the Voyager WiSight 2.0 Wireless systems. So all that wiring you have for the first gen is only going to work with the first gen, you'd need to use the second gen wiring instead.

Reply

Henry

7/23/2024

@BryceD thank you. I sold this trailer and can't find the monitor. I guess I have to face the music and buy them a new unit. If I were to find a used generation 1 monitor, what model numbers would I look for? Thank you again

Reply

Bryce D.

7/23/2024

@Henry I'm not too sure what the part number is for the monitor, but I know the camera is WVH100 so you can take that to ASA and they should be able to let you know what it is.

Reply

See All (5) Replies to Henry S. ∨

Answer 1

Hi James, thanks for reaching out! If your 2017 Airstream has the WiSight 2.0 system, then we have the part #ASA74YR designed for a pre-wired camera system. If you have the older Voyager system, then there isn't a replacement camera and…

view full answer...

Answer 2

Since the Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA57YR uses a wireless connection from the monitor to the camera, the wiring is really only needed to provide power to each - you won't be running wiring from one to the other. It…

view full answer...

Answer 3

To pair the Voyager WiSight 2.0 Wireless RV Backup Camera 7" Monitor #ASA27FR with your Voyager WiSight 2.0 Camera #ASA64YR or #ASA74YR you will need to follow the following steps. PAIRING PROCESS This system contains an Auto-Pairing function.…

view full answer...

Answer 4

I have attached for you below the pairing procedure for the Voyager WiSight Wireless RV Backup Camera System part #ASA84YR. Please note, a mistake I have made in the past was applying power to the camera too soon, this cannot be done until the…

view full answer...

Answer 5

Hello Dennis, thanks for reaching out. Your Voyager NTSC System VCCT 130 camera can be replaced with the Voyager RV Backup Camera w/ Night Vision in Black #VGR84VR. You can use the current wiring but to adapt the new camera to your existing Voyager…

view full answer...

Answer 6

Hey Jeff, thanks for reaching out. Aside from the suction cup mount, there is one other mount for 7" WiSight display. Take a look at the Voyager Universal Mount #VOSHD6MNT. This allows for permanent installation on your dash and uses a ball and…

view full answer...

Answer 7

More than likely you will need a new system. The WVOM541AP was discontinued. The new monitor is the Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR, but this monitor only works with the WiSight 2.0 systems. You likely have the original…

view full answer...

Answer 8

The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR does not have a power cord or adapter to allow it to plug into a USB outlet so you would need to install a 12v outlet, like part #RM-9332, in your vehicle in order to…

view full answer...

Answer 9

For your 2021 Winnebago 2108DS pre-wired for a Voyager back-up camera I recommend the Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR. This wireless backup camera system is designed for RVs/Travel Trailers with factory-installed Voyager…

view full answer...

Answer 10

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

view full answer...

Answer 11

I have a complete replacement camera system option for you, but unfortunately your current VCCS130B camera has been discontinued and there is no compatible camera still made. While it's not what you're hoping to hear, I recommend replacing…

view full answer...

Answer 12

Since your trailer is not pre-wired to accept a backup camera, the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV #ASA37YR will not work for you. Instead, you're going to want to take a look at the Voyager…

view full answer...

Does the First Generation Voyager WiSight Camera Work W/ The Voayger WiSight 2.0 Monitor?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching