bing tracking image
Q & A Icon

Upgrading From Original WiSight to WiSight 2.0 Camera System  

Question:

Hi, I would like to replace my old voyager wisight wireless backup camera system7 monitor.2012 to wisight 2.0 wireless backup camera system7 monitor My question is in case install both side cameradriver passenger side, witch wiring cable kit need to monitor with camera and how to connect monitor .and I know need extension 15 camera cable. There are need another wiring cable to connect monitor with camera. In picture I found monitor cable port is not fit camera cable end shape, Thank you

0

Expert Reply:

Since the Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR uses a wireless connection from the monitor to the camera, the wiring is really only needed to provide power to each - you won't be running wiring from one to the other. It looks like you'll need to swap out the wiring harness used to get power to your camera but aside from that everything slese should be the same.

We do have parts to setup a wired Voyager camera system and for that you'll need the following:

- 7" Monitor # VO34FR
- Driver Side Camera # VCMS12LGPR
- Passenger Side Camera # VCMS12RGPR
- Rear Camera # VGR34FR
- Length of Cable (see attached link)

Let me know if you have any other questions!

expert reply by:
0
Jon G

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>