Are There Rebuild Kits for HappiJac Electric Truck Camper Jacks Model 4100 and 4500

Question

Question:

I was wondering if you had rebuild kits for Happijac camper jack Model 4100 Model 4500 Two of each Thank you

asked by: Greg

0

Expert Reply:

I do have an option for you but we don't have rebuild kits for the HappiJac Electric Truck Camper Jacks Model 4100 and 4500. These jacks have been discontinued and I recommend a full replacement system, the HappiJac Electric Truck Camper Jack System part # LC736514-ELKIT which is designed to replace both of these models. This is a complete system that comes with new jacks, motors, wringing, control box, and remote.

expert reply by: Conner L

0

Answer 1

The HappiJac Electric Truck Camper Jack System #LC736514-ELKIT is the replacement kit for the 4100 series jacks that you have. It uses the same Replacement Jack #LC736514 and Motor Head #LC759927 for the front and rear jack positions.

view full answer...

Answer 2

It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a…

view full answer...

Answer 3

The Replacement Bevel Gears for HappiJac Truck Camper Jack Systems #LC182851 are the correct gears for your 4600 jacks. However, we unfortunately do not have any pictures or videos of the steps to replace the gears. I will go over how to do this the…

view full answer...

Answer 4

Yes, the Replacement Bevel Gears for HappiJac Truck Camper Jack Systems #LC182851 is confirmed to fit your Happijac model 4150.

view full answer...

Answer 5

Yes, the Replacement Jack for HappiJac Truck Camper Jack System part #LC736514 (Model 4220) will fit your HappiJac Truck Camper Jack System Model 4150. If you need a new gearbox/motor then we have that as well, the Replacement Motor and Gear Head…

view full answer...

Answer 6

The replacement motor kits that you are seeing will not work with the 4800 series jacks. The 4800 series, uses the 182522 motors and we do not carry them. The 4800 series was discontinued, making it more difficult to find replacement parts. With the…

view full answer...

Answer 7

The replacement manual jack for the 4200 and 4160 jacks are the HappiJac Manual Truck Camper Jack System, part #LC736514-4. We have the electric upgrade kit for this part, so we have the upgrade for you. Because your camper is already pre-wired, you…

view full answer...

Answer 8

I reached out to my contact at Lippert and was able to verify that the Replacement Bevel Gears #LC182851 you referenced are confirmed to work on your HappiJac 4500 model system. This kit will work perfectly as a replacement.

view full answer...

Answer 9

I called a contact at Lippert Components, and they confirmed the Replacement Bevel and Gear, part #LC182851, that you referenced will definitely work on your HappiJac 4100 model. It's the exact replacement that you need.

view full answer...

Answer 10

The Replacement Bevel Gears for HappiJac Truck Camper Jack Systems #LC182851 will work for the 4600 series HappiJac's. The only difference between the 4500 (these work with the 4500) and 4600 series is that the 4600 series has the drop leg…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Are There Rebuild Kits for HappiJac Electric Truck Camper Jacks Model 4100 and 4500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching