6 Lug Trailer Hub with for Spindle Bearing Dimensions of 1.75 and 1.25 inch

Question

Question:

I have a trailer with a 14.5 tire and it’s on a trailer house still wheel. It has a 1.78 inner bearing and a 1.25 putter bearing is there a conversion to a 6 x5.5 wheel

asked by: Evan V

0

Expert Reply:

Your dimensions are VERY close to what the standard 5,200 through 6,000 lb trailer axle bearings are designed for like what the Easy Grease Trailer Hub and Drum part # AKHD-655-6-EZ-K uses. This has bearing dimensions of 1.75 and and 1.25 inch so it's very close. I would recommend remeasuring what you have to see if maybe the inner bearing is 1.75 inch. I would be shocked if it wasn't.

expert reply by: Jameson C

0

Answer 1

There are actually no specific torque specs for a hub and drum such as the Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K. You really need to do it by feel, tightening it down so the hub spins but there isn't any looseness or movement from the…

view full answer...

Answer 2

The Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased #AKHD-655-6-EZ-K you were looking at come as a quanitity of one hub. This hub includes the inner and outer bearings, inner and outer races, grease…

view full answer...

Answer 3

Yes, all of the hub/drum and brake assembly components of a Lippert 5,200 lb axle are exact same as Dexter 5,200 lb axle. This includes the hub/drum part #AKHD-655-6-EZ-K that you referenced as well as matching assemblies part #AKEBRK-6.

view full answer...

Answer 4

We've got you covered! To replace your wheel bolts you need the Dexter Wheel Bolt #7-262 which is a 1/2" diameter and 2-11/16" long. Since your hub and drum assembly looks to be pretty worn though I recommend just replacing the whole…

view full answer...

Answer 5

Both the Dexter Electric Trailer Brake Kit #23-47-48 and the Electric Trailer Brake Kit #AKEBRK-2 are excellent options to replace the brake assemblies on your 2009 Palomino Pony pop-up camper. A lot of the Dexter Axle kit price comes from the name…

view full answer...

Answer 6

If the races are the only problem with the hubs, you can use a brass punch to pound out the races and install new ones. The proper race would be #LM67010. None of the hubs we offer would use the LM67048 as the inner and outer bearing. The LM67048 is…

view full answer...

Answer 7

That's an older part number but I was able to find out the exact replacement you need. The hub you need is the Dexter part #8-201-5.

view full answer...

Answer 8

Based on the information you provided in your question, the axles on your gooseneck trailer most likely have either a 5,200 pound or 6,000 pound capacity. As you mentioned, based on your measurements, at minimum these are 5,200 pound axles. And with…

view full answer...

Answer 9

We have the exact hub you are looking for as part number #8-201-5UC3. This is a 5,200 lb axle hub that has a bolt pattern of 6 on 5-1/2 inch.

view full answer...

Answer 10

The only difference between the #AKHD-655-6-K and the #AKHD-655-6-EZ-K is the cap that the hub uses. One is a solid cap and the other has a rubber plug that can come off for access to EZ lube fittings. Since you have caps already you could use either…

view full answer...

Answer 11

The Dexter hub you referenced, 8-201, is a 5,200 lb hub, though a 5 on 4-1/2 bolt pattern does not come on 5,200 lb hubs. The correct bearings for the 5,200 lb hub are #25580 and #LM67048, while the proper races are #25520 and #LM67010. I have…

view full answer...

Answer 12

I believe you're looking for the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459. This is the same thing you're referencing in your question, measures 12" diameter x 2" wide, and fits 6,000 lb axles with 14 1/2" to…

view full answer...

6 Lug Trailer Hub with for Spindle Bearing Dimensions of 1.75 and 1.25 inch

Product Page this Question was Asked From

Continue Researching