Difference Between The Curt 45920 And 45922 Channel Mount Htich Ball

Question

Question:

What are the differences between those two models the dimension the weight everything seems to be the same except for one is a 13000 and one is a 20,000. What is the difference?

asked by: Brent L

0

Expert Reply:

Along with # C45922 having the ability to tow more than 7,000 lbs more than # C45920, the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922 can also be changed to use a 1-7/8" ball # C48810 and a 2" ball # C48820. The Curt # C45922 also has a built in anti-rattle design that helps reduce towing noise, and can fit lunette ring couplers with a diameter of 2-12" or 3".

expert reply by: Bryce D

0

Answer 1

Hello Mark, Per the tech at Lippert you are going to want to use AW-32 Hydraulic Fluid, and not an automatic transmission fluid.

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

We do have a solution for you, though there is not a Gooseneck to 5th Wheel Trailer Coupler Adapter such as #KPG5-Q25-IP which has an offset. Since you are looking to use your gooseneck trailer and have a fifth wheel hitch I recommend checking out…

view full answer...

Answer 4

I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers #325-GH-525 for your application. While the Blue Ox Adjustable Ball Mount can be used in the rise position Blue Ox does not currently offer the components of this ball mount…

view full answer...

Answer 5

I'd love to help but we don't offer replacement control boards for your air conditioning units. In order to obtain these you'll need to reach out to the manufacturer directly assuming they are still available. The only option we'd be…

view full answer...

Answer 6

I do have an option but the Flash Solid Steel HD Adjustable 2-Ball Mount part #FA49-00-5925 doesn't have an pintle hook/ball adapter. Instead, you can use the Curt Adjustable 2-Ball Channel Mount part #C45926 which has similar specs and can be…

view full answer...

Answer 7

Your plan could definitely work but what I would do is weld on a channel, such as #DM59601, and using a coupler such as #DM12688-95 for a 2 inch ball or #DM07678-95 for a 2-5/16 inch ball. And of course, some hardware, #PS024202, to mount the coupler…

view full answer...

Difference Between The Curt 45920 And 45922 Channel Mount Htich Ball

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching