Customers compare C45908 to these similar products
Products Featured in this Video
What's up everybody, it's AJ with etrailer.com. Today, we're checking out the Curt pintle hook. Now, this is going to be for 2 1/2 inch hitches, and it's got a two and 5/16 ball in there. It's going to go and attach to your lunette ring like we have set up here. You see how it lowers down around that ball. This part comes up on top, lashes it in place.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I have another option for you but No, you cannot replace the 2-5/16" ball on the Blue Ox #BLU25XR with a 2" hitch ball. Instead I recommend going with the Gen-Y #325-GH-924 which has a similar rise/drop at 6" either way, and includes a…
view full answer...Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and the Curt #C45908 are identical. According to Blue Ox and Curt they don't make the parts for each other so in theory it is not the exact same part, just the same…
view full answer...I went out to our warehouse to measure the Curt Pintle Hook #C45908 to get the measurements you asked for. I put it together and used digital calipers to ensure this measurement was as accurate as possible and found that it measured approximately…
view full answer...The Demco #DM12688-95 you've looked at would be a good choice. The 2 inch channel mount coupler is compatible with a 3 inch channel, and has bolt spacing of 2 inches on center. Demco is known for high quality products, you'll get years of…
view full answer...When mounting a cast head coupler like Bulldog #BDA256C0317 to its mounting channel you will want to torque the mounting bolts to the specification indicated by the manufacturer in the instructions. The torque spec will vary from coupler to coupler.…
view full answer...Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…
view full answer...There is pretty much a standard for channel mount couplers such as #DM12113-95. The channel width is usually 3 inches and the couplers are usually around 2-7/8 inches wide to fit in the 3 inch wide channel. Once torqued down there is no side to side…
view full answer...The best air bag suspension kit for your 2022 Ford F-450 is the Firestone Ride-Rite kits due to their durability with the double-convoluted shape and crimp rolled seal. There are 2 different options for your pickup and the difference is just the…
view full answer...Because your F250 is not a long bed model, I would highly recommend you go with the Reese Elite Series w/ Slider, part #RP30144. Although the current trailer you are looking at has a v-type nose on it that might work okay with the #RP30921 and have…
view full answer...It sounds like you are looking for a 2-Tang clevis hitch for the 3" receiver on your vehicle. Since there is no 3" option I recommend the Gen-Y 2-Tang Clevis for 2-1/2" Hitch Receivers - 21,000 lbs #325-GH-069. Along with this clevis…
view full answer...