Search: 45902   >  

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

If the braking assemblies you have now are indeed 12-1/4" x 3-3/8" and use a four bolt brake mounting flange then you are going to want to use the Electric Trailer Brake Kit w/ Dust Shields part #AKEBRK-8, not the Electric Trailer…

Based on the number you listed the correct hub/drum you need is the part #8-219-9UC3 which is a Dexter hub for 5,200-7,000 lb trailer axles that have an 8 on 6-1/2 inch bolt pattern.

The part number "TCM22333TBN" that you referenced on your grease seal cross-references to the Grease Seals 10-36 part #RG06-070. If you need any other parts for your trailer hubs i.e. bearings or races, I would need to know either…

With your 2023 Kia Telluride SX Prestige X-Line having LED tail lights you will need the Curt Powered Tail Light Converter #C59236. The Harness #C93FV you found is only for use on models with incandescent tail lights. The Harness #C59236 will require…

The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.

From what I could find on the Dexter 072-042-00 leaf spring, it appears to be the standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated up to 1,750 pounds (per spring). With that said, the 4-Leaf Double-Eye Spring for…

Yes, for this you are going to want to take a look at a powered drive conversion kit like the Bulldog Powered-Drive Kit for Single-Speed Jacks part #BD1824200100. This kit is designed specifically for Bulldog trailer jacks but can most likely be used…

The lens you need is part #A8RB. The light you have is a standard style trailer taillight and the lens part #A8RB is designed to fit it.

The etrailer and Pro Series A frame jacks will use 3/8 inch bolts, which is the standard size for A frame jacks and couplers. For install details and some product demonstration videos, click the provided links.

Along with #C45922 having the ability to tow more than 7,000 lbs more than #C45920, the Curt Pintle Hook with 2-5/16" Hitch Ball #C45922 can also be changed to use a 1-7/8" ball #C48810 and a 2" ball #C48820. The Curt #C45922 also has…