Grease Seal for Haulmark Trailer TSR85X20WT2 with 3,500 lb Axle

Question

Question:

I have a 2005 Haulmark 20 enclosed Race Trailer, model # TSR85X20WT2. Im trying to find axle hub seals so I can service my trailers wheel bearings. Can you advise if you folks carry them? Thanks.

asked by: Michael J

1

Helpful Expert Reply:

I was able to find that your Haulmark trailer TSR85X20WT2 has 3,500 lb axle so for a hub seal you'd want the # RG06-050.

expert reply by: Jameson C

1

Answer 1

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…

view full answer...

Answer 4

We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any damage…

view full answer...

Answer 5

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

view full answer...

Answer 6

Hey Chris! We don't have the O-rings individually but we do have the Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98" #xlprolube1980. These are the same caps that came with your disc brakes. If you need anything else feel free to reach…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

Dexter recommends a SAE 90, SAE 80W-90 or SAE 75W-90 oil to be used. I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs #XLPROLUBE as it is a synthetic 90 weight oil that helps reduce friction and to keep bearings cool. Since your cap was…

view full answer...

Grease Seal for Haulmark Trailer TSR85X20WT2 with 3,500 lb Axle

Product Page this Question was Asked From

Continue Researching