Recommended Propane Fittings and Hose for Jetboil

Question

Question:

Thank you But I cant Have the regulator on the Jetboil again. I’m trying to use the trailers quick connect hose that comes with the trailer and that already has a regulator built in. I need A direct connect from the trailer quick connect to the Jetboil direct connect to the stove and not use the Jetboil connector as it has a regulator already. Hope I’m explaining it correctly.

asked by: Arthur D

0

Expert Reply:

I have a couple options I recommend for you. If you want a short cable, I recommend the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 4' # 100476-48-MBS. If you want a little more distance from your camper, then use the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 10' # 100476-120-MBS. Both options will work well with the low flow quick release adapter on the back of your trailer.

If you want a high flow, then you will want to use a Tee fitting from your main propane connection. For this, I recommend the Camco 90-Degree Brass Propane Tee w/ 3 Ports and 12' Long Extension Hose # CAM59143.

expert reply by: Jason S

0

Arthur

8/21/2020

Which hose should I buy To connect a Jetboil genesis base camp system to the quick disconnect connection on the trailer

Reply

Jason S.

8/21/2020

Thanks for the clarification. You can't simply use a quick connect from the back of your trailer to the quick connect on the Jetboil that has a regulator on it because then 2 regulators will be in-line. You simply won't get the pressure you desire for proper use. I recommend you use the MB Sturgis Sturgi-Stay T-Fitting for Type 1 Valve - Quick Disconnect and Disposable Cylinder Ports # 103613-MBS and then use the Quick Disconnect Propane Hose - 12' # 37207-31235. This will give you the connections you desire and will allow the proper high flow propane so your regulator on your Jetboil will function as designed.

Reply

Arthur

8/24/2020

Thank you But I cant Have the regulator on the Jetboil again. I’m trying to use the trailers quick connect hose that comes with the trailer and that already has a regulator built in. I need A direct connect from the trailer quick connect to the Jetboil direct connect to the stove and not use the Jetboil connector as it has a regulator already. Hope I’m explaining it correctly.

Reply

Jason S.

8/24/2020

If I now understand correctly, you do not have a regulator but do have a quick connect on your Jetboil. Due to this, you will use the regulator already on your trailer and the low flow quick connect at the rear of the trailer. Then you will use the Quick Disconnect Propane Hose - 12' # 37207-31235 which should connect right up. If you need the connection fitting on either end, then use the MB Sturgis Quick Disconnect Kit for Low Pressure Appliances # 104052-401132 along with the Thread Sealant Tape for Gas Lines # 37207-30025.

Reply

Answer 1

I'd give you numerous options if available but there is only a single bike rack that meets all of your criteria - wheel-mounted, mountain and ebike compatible, rated for use with a bumper-mounted hitch on a travel trailer, and can fold away, That…

view full answer...

Answer 2

The suspension of an RV is much less sophisticated than a standard vehicle so it places more stress on the Yakima OnRamp #Y36FR. Because of the additional wear and tear on the bike rack testing has shown that adding more than 40lbs can damage the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…

view full answer...

Answer 7

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 8

Hey Gene! There's nothing on the market that's going to fit all of your requests but I've got one that's pretty close. The highest capacity 4-bike bike rack is going to be the Benton Shifts & Grins item #B82FR. It has a 55 lbs…

view full answer...

Answer 9

Hey Randy, The arms on your slide-out awning have A&E labels so you'll actually have to reach out to Dometic because Solera and other brands use different size components, making them incompatible with each other. If you give Dometic a call…

view full answer...

Answer 10

You are off to a great start with the Nighthawk #RM-576, D-ring adapter #RM-035, and the Stay N Play #SM99251 but you do need lighting for the flat towed vehicle. For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting…

view full answer...

Recommended Propane Fittings and Hose for Jetboil

Featured Help Information

Miscellaneous Media

Continue Researching