Recommended Brake Pads for Dexter 225 Calipers

Question

Question:

Looking for brake pad options for Dexter 225 calipers. Should I be looking at the Titan 225 or Kodiak 225 calipers as a guide to what could be a direct replacement? Thank you for your time.

asked by: Gary P

0

Expert Reply:

The Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs # K225CP are a direct replacement that will work well for your Dexter 225.

expert reply by: Jason S

0

Answer 1

The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to…

view full answer...

Answer 2

The correct brake pads you'll need for the Kodiak Disc Brake Caliper part #KDBC225DAC (225) which is made by Dexter is the Kodiak Ceramic Brake Pads part #K225CP. Please note, the Kodiak Disc Brake Caliper is offered in a few different finishes…

view full answer...

Answer 3

Yes, the Kodiak Stainless Disc Brake Kit #K2R35S that you referenced would work perfectly with a Tie Down Engineering actuator. I attached an install video for this for you to check out as well.

view full answer...

Answer 4

Trailer manufacturers do not often maintain specs for smaller items like brakes/brake pads used in production of their trailers so the VIN will not usually help, but you may be able to at least get the brake brand from the manufacturer. Knowing the…

view full answer...

Answer 5

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 6

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

view full answer...

Answer 7

So the part number MKD289 is an automotive application for brake pads. If that's the style you need the correct replacement is the #K225CP which is the match. I attached a chart that has some other interesting info for picking out replacement…

view full answer...

Answer 8

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 9

Yes, we do Steve! It is the Grease Seals 10-36 (pair) item #RG06-070. This is also a pair of seals with a inner diameter of 2.250" and an outer diameter of 3.376".

view full answer...

Answer 10

Hi again David; since TDE is no longer around replacement brake pads are not available for the 46304. However, to avoid complete replacement we have found that the Kodiak Disc Brake Caliper #KDBC225DAC will work as a replacement for the 46304. If you…

view full answer...

Answer 11

There are five mounting brackets available that fit the Optronics Trailer Clearance Side Marker Light #MC65AB. These three are all black plastic. They are Optronics #A65PBPG, #A65PB and #A65B. The first two come with a single wire, the…

view full answer...

Answer 12

The Fulton A60 Surge Brake Actuator is obsolete so you'll need to replace the entre unit for which I recommend using the Demco Hydraulic Brake Actuator part #DM72VR for drum or part #DM62VR for disc. The Demco actuator has a 7,000 lb rating which…

view full answer...

Recommended Brake Pads for Dexter 225 Calipers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching