Solution for Trailer Hitch Bolts that Seem to Big to Thread In

Question

Question:

Finally got around to trying to install this on my 2008 Matrix. It included 4 M12-1.25 30mm bolts. They will not thread into the holes. I have cleaned out the rust and oiled the holes. It appears that they should be M11-1.25 30mm instead. Please advise

asked by: Ross A

1

Helpful Expert Reply:

We get this question pretty often and while it may seem like the threads are too small the real fix is to use a thread tap with the M12 size and they'll thread in. This happens frequently on vehicles that have a few winters on them.

expert reply by: Jameson C

1

Answer 1

The correct capacity for Curt hitch #C12234 is 2000 lbs towing and 200 lbs tongue weight. I took a look at the owner's manual and it states that your 2004 Pontiac Vibe has a maximum towing capacity of 1,500 lbs, which is the weight you would need…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, you would want to use an anti-rattle for the 1-1/4 inch portion of the adapter. For that the Hitch part #C11257 would work well. It uses a U-bolt to hold the adapter tight to the hitch tube.

view full answer...

Answer 4

I reviewed an online edition of the owner's manual for your 2016 Buick Encore and on page 186 GM indicates this car is not intended to tow any trailer. I do not recommend going against this advice. The hitch I do recommend, which would allow use…

view full answer...

Answer 5

For a trailer hitch, I'd recommend the Curt Class I hitch, part #C11527. Many of our customers do indeed install their own hitches, I've linked you to the install instructions and an install video. You can take a look at those and likely get…

view full answer...

Answer 6

If you plan on towing a trailer then wiring and a ball mount would be necessary as well. For the wiring you'll need the Tekonsha T-One Wire Harness #118460. For the ball mount you'll need to know the ball size for the coupler (1-7/8, 2",…

view full answer...

Answer 7

I went out to the warehouse and examined the Curt Hitch #12221 and #C12013. While they are similar, there is a key difference in the designs. From the top of the mounting brackets on each side of the hitch down to the bottom of the receiver, hitch…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Solution for Trailer Hitch Bolts that Seem to Big to Thread In

Product Page this Question was Asked From

Continue Researching