Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
Updated 03/12/2025 | Published 03/18/2020
Products Featured in This Question
Question:
what number with 1.25 in .750 out
asked by: Clay
1
Helpful Expert Reply:
From the measurements you gave me, it sounds like you have an Agricultural Spindle like # TRU54FR that uses # LM67048 Inner bearing and # LM11949 Outer bearing.
For a hub assembly with a 4 on 5 bolt pattern # AH15450ECOMP will work and the bearings, seal and cap are included.
I linked the parts along with a few review videos for you to reference.
expert reply by:
Robert C
1
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Search Results: dx22xr
- Q&A: Replacement Hub Needed with LM67048 Inner Bearing and LM11949 Outer Bearing
- Shop: Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Q&A: Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Demco Trailer Coupler w/ 5-Position Adjustable Channel - eZ-Latch - Black - 2-5/16" Ball - 21K
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Looking For Spindle With LM67048 Inner And LM11949 Outer Bearing
- Q&A: Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
- Q&A: What Size Trailer Tire is Equivalent to 20.5 x 8-10
- Search Results: t1721400042
- Q&A: What Spindle Does Titan Trailer Hub # DX22XR Fit
- Search Results: lm11949
- Search Results: 15245
- Search Results: tapered spindle hub
- Search Results: 168233
- Search Results: raft trailer rollers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Review of the Bearing Buddy Bearing Protectors
- Video: Timken Replacement Trailer Wheel Bearing: The Breakdown
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Video: All You Need to Know About the Grease Seal
- Video: The Low-Down on the BT8 Spindle for 2,000-lb Trailer Axles
- Video: What to Know About the etrailer Boat Trailer Jack w/ Wheel
Roy
3/12/2025
I also have the same spindle dimensions. My hubs are 5x4.5 studs and the hub width is a small 3.5 inches. I could replace the bearings but I'm not sure I'll find a seal that'll fit. Any suggestions? Thank you.