How To Wire Brake Buddy Battery Charger 39339

Question

Question:

Brake Buddy Battery Charger #39339 Installation Instructions

asked by: William G

1

Helpful Expert Reply:

The BrakeBuddy Towed Vehicle Battery Charge Kit part # BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.

expert reply by: Heather A

1

click to enlarge

Answer 1

One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part #HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the…

view full answer...

Answer 2

The Blue Ox Tow Bar Wiring Kit BLU86XR you mentioned is actually designed to fit 2014-2022 Jeep Grand Cherokee's with a tow package, as well as a 2022 Jeep Grand Cherokee without a tow package. With that being said, this kit is not going to be…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

I am happy to answer all of your questions about the Brake Buddy Classic 3 Supplemental Braking System part #HM39494. The Brake Buddy Classic 3 uses a built-in inertia sensor to detect when the motor home is braking then the the actuator arm will…

view full answer...

Answer 5

Hey Dale, while we don't have the linch pins that come with the part #BX88219 we do have the part #3371303033 that is a pair of 1/4 inch diameter pins.

view full answer...

Answer 6

When running the breakaway wire of the Blue Ox Patriot #BRK2012 there are two methods: Method 1: Through the firewall 1. Look for a pre-existing hole in the firewall, if no hole exists, drill a ½” diameter hole. Insert a grommet into hole. Note:…

view full answer...

Answer 7

Yes, the Roadmaster InvisiBrake Supplemental Braking System item #RM-8700 you were looking at does need power while your Ram 1500 is being flat towed. It has an air compressor that will be running. The system is run directly to your battery so it…

view full answer...

Answer 8

The first thing you need to flat tow your 2024 Ford Bronco is the correct base plate kit which I personally like the Blue Ox base plate kits as they are the easiest to use. So you would want the part #BLU23XR. In addition to the base plates, you will…

view full answer...

Answer 9

There is not currently an adapter available so you will have to splice some wires together to install the Brake Buddy Stealth Supplemental Braking System - Proportional #HM39530 in your 2020 Jayco Greyhawk. The brake controller of this system has 4…

view full answer...

Answer 10

The Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25 is a great help for your 2012 Honda CR-V especially because your Patriot brake unit will be drawing power. To utilize this you will need power from your motorhome as well using the…

view full answer...

Answer 11

If all you want is to prevent the 12 volt power supply of your trailer battery wiring from backfeeding onto your vehicle wiring or vice versa what you need is a one-way diode like part #RM-690. This only allows current to flow in one direction so…

view full answer...

Answer 12

Technically yes, your 2021 Jeep Wrangler Unlimited is able to use the Brake Buddy Select 3 Portable Supplemental Braking System #HM39524. The issue is with the unit having issues sitting properly on the floor of some Jeeps and being able to properly…

view full answer...

How To Wire Brake Buddy Battery Charger 39339

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching