Flat Towing 2018 Ford Explorer Behind Motorhome
Products Featured in This Question
Question:
Can a 2018 Explorer 2x4 rear wheel drive be flat towed behind Class A?
asked by: Clyde F
Expert Reply:
According to the owner's manual, you can flat tow a 2018 Ford if and ONLY if it's equipped with the 3.5L engine. If you have the 4 cyl engine, you must use a tow dolly or a trailer. You'll want to consult your owner's manual for yourself to confirm this.
The owner's manual lists a specific procedure that must be followed before towing:
If the vehicle has keyless start, start the engine while holding the brake pedal down. While still holding the brake, shift into Neutral. Turn off the vehicle by pressing the start button once. Disconnect the negative battery cable.
If the vehicle uses a key, do the same as above, but turn the key to the slot between the accessory and the off position. Disconnect the negative battery cable.
Ford does't recommend towing at speeds above 65mph, and recommends that the vehicle be restarted about every 6 hours.
If the vehicle can be flat towed, you'll need a few other items to complete your towing system.
You'll need a tow bar, base plates, taillight wiring, safety cables, a supplemental braking system and possibly a high/low adapter and a few other odds and ends.
The base plate necessary will depend on which engine your Explorer has and whether or not it has the adaptive cruise control and active grill shutters. If you don't have the 3.5 EcoBoost, the # RM-52446-5 base plate kit would be recommended. This base plate kit is compatible with the active cruise and grill shutters. For either engine, with the cruise option but without the grill shutters, use # RM-524446-5 or # RM-524445-5 for either engine with the grill shutters.
For a tow bar, you can't go wrong with the Roadmaster Falcon 2, part # RM-520. For safety cables, use # RM-643.
For tailight wiring, the Roadmaster # RM-15267 would be a good choice, as it's extremely easy to use once it's installed. Roadmaster also recommends a battery quick disconnect, part # RM-766.
For supplemental braking, use the Roadmaster Invisibrake # RM-8700. Once installed, the Invisibrake is ready to go when you are, no set-up or fiddling necessary. A brake stoplight switch, part # RM-751477 will also be needed.
The base plate height will vary according to which one you use, if the receiver height of your Class I is more than 3 inches higher or lower than the base plate height, you'll need a hi/low adapter. I'll link you our selection of adapters and to some help articles about flat towing a vehicle.
Floyd
9/26/2024
Need help on flat towing with 2018 Ford Explorer 4 wheel drive 3.5 L. Have all components hooked up and have no lights. Need some advice
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Base Plate for Tow Bar
- Shop: Blue Ox Battery Disconnect for Towed Vehicle w/ Flat Tow Brake System - Gas or Diesel
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Shop: Blue Ox Avail Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs
- Shop: Blue Ox Apollo Non-Binding Tow Bar - RV Mount - 2-1/2" Hitch - 15,000 lbs
- Shop: Master Lock Pivot Lock Hitch Pin for 2" Hitches - 5/8" Diameter - Stainless Steel
- Search Results: lockable hitch pin
- Search Results: hitch pins and clips
- Search Results: bx7425
- Shop: Trailer Wiring
- Shop: Replacement Heavy Duty Firestone Air Bag for RV Applications
- Shop: Trailer Hitch
- Search Results: remote battery disconnect
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Q&A: Demco Air Force One Compatibility With A 2022 Newmar Dutch Star On A Spartan K2 Chassis
- Q&A: Which Demco Air Force One Fits 2022 Dutchstar Built on Spartan K2 Chassis
- Video: Mount: Roadmaster Direct-Connect Base Plate Kit on a 2019 Ford Explorer
- Video: Installing the etrailer Invisible Base Plate Kit on your 2018 Ford Explorer
- Article: Trailer Wiring Diagrams
- Q&A: Can I Flat Tow a 2018 Ford Explorer with EcoBoost Engine and Adaptive Cruise Control
- Video: Mount: Blue Ox Base Plate Kit on a 2018 Ford Explorer
- Shop: Vehicle Lights
- Search Results: 76577
- Article: 2024 Best Gifts for Haulers & Towers
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Parts Needed to Flat Tow 2018 Ford Explorer with Adaptive Cruise Control
- Video: Set up: Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights on a 2018 Ford Explorer
- Video: Best 2018 Ford Explorer Flat Tow Options - Tow Bar Wiring
- Article: How to Choose a High-Low Adapter
- Search Results: rm~751000
on Tow Bar Base Plate
Floyd
9/26/2024
Hi Mike my name is Floyd. I have hooked up my flat toe components for my 2018 Ford Explorer. Base plate charge line kit for my Brake Buddy which is included. Quick battery disconnect switch and my to six diode wire for turn signals and lights. Connected everything to the vehicle and I have no lights in the back. Functioning without being hooked up looks to be fine although I have a check engine light on and my back tailgate lift won't work