Does the Headliner Have To Be Removed To Install the TracRac TracVan On a 2015 Ford Transit Connect

Question

Question:

Is there any option for installing a Rivnut style adaptor with the Wagon Transit Connect? I would love to use this rack but really don’t want to pull he headliner if I don’t have to. Thanks!

asked by: Brian Y

0

Expert Reply:

The Thule TracRac TracVan ES Van Ladder Rack part # TH29611XT which is a fit for your 2015 Ford Transit Connect does not require you to remove the headliner for installation. Instead, there are fixed points on the roof of the Transit Connect with plugs in them. Once the plug are removed you will then place the mounting feet over these holes and then secure them with the included hardware.

I have attached a photo on the above for you to reference.

expert reply by: Conner L

0

click to enlarge

Answer 1

For your 2016 Ford Transit Connect the TracRac part #TH29611XT is a confirmed fit and would work well.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

view full answer...

Answer 6

It sounds like your 2016 Ford Transit Connect has factory flush rails that run front to back. To add a rack to those rails you will need to look at roof rack options instead of the ladder rack section. The only problem is that the roof rack options…

view full answer...

Answer 7

For a complete towing setup for your 2023 Honda Passport you will need a hitch, wiring, ball mount, and brake controller. I recommend the following: -etrailer Trailer Hitch Receiver #e44AR -Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer…

view full answer...

Answer 8

Yes, it can and that is exactly what you need! The Curt T-Connector Vehicle Wiring Harness item #CU86FR is custom fit for your 2017 Honda Pilot. It will provide you with a 7-way connector so you can tow a trailer with brakes. Some other parts you…

view full answer...

Answer 9

Hi Louis, Are you not able to find the factory connector to plug in the Curt Custom Wiring Adapter #C51392? If so I've attached a video of another brake controller wire harness that plugs into the same connector on a 2019 Passport to help you…

view full answer...

Answer 10

The Tekonsha Plug-In Wiring Adapter item #3070-P you were looking at is confirmed to fit the newer Honda's with the tow packages. In order to use that on your 2022 Honda Pilot without the tow package you will need the T-One Vehicle Wiring Harness…

view full answer...

Answer 11

Although we don't have a custom fit mirror option for the 3rd generation Honda Passport, we do offer a good universal fit option. I'd recommend the K-Source Dual Lens Universal Towing Mirror, part #KS3990. The dual mirrors provide a great…

view full answer...

Answer 12

When used with the #A45GB grommet, a 4-1/2 inch diameter hole is needed to flush-mount a 4 inch taillight.

view full answer...

Does the Headliner Have To Be Removed To Install the TracRac TracVan On a 2015 Ford Transit Connect

Product Page this Question was Asked From

Continue Researching