Troubleshooting Trailer Jack that is Slow to Rise and Lower
Updated 06/18/2019 | Published 06/17/2019 >
Products Featured in This Question
Question:
the last time we came back from a trip I was docking the trailer in the driveway the jack was sluggish to go up and the clutch kicked in as if I was at the top of the max height, but I stopped and tried just to make sure and was able to go up a bit more, this happened approximately three times until I was at the maximum height. I wasnt plugged into the car any mor but I had connected to a 30 amp receptacle. I this an issue and the jack is near the end of its life, or am I just being paranoid. We had just returned from an approximate 5 hour drive. The trailer is a 2016 Premier Bullet made by Keystone. It is a 26 foot couples model, from tip to tail 31foot 5
asked by: Neil P
Expert Reply:
It could be a few things that caused your jack to slow down like you mentioned. I'd first check the condition of the trailer battery as that's most likely it. If the battery is weak or not fully charged the jack won't operate like it should. Also check to make sure the wiring of the jack is solidly connected to the battery as well as the ground. The jack grounds through the mounting hardware so make sure the mount is clean and the main ground strap of the trailer wiring is connected to the frame.
If all of that checks out it's probably the jack going out.
The best replacement is the fully featured Lippert # LC643589 Smart Jack that remembers your hitch and unhitch heights and will move into place at the press of a button. This powered jack has 18 inches of screw travel and the drop leg option adds another 4-1/2 inches of lift. It als has a large foot plate to support the front of the trailer and be less likely to press into blacktop asphalt.

Product Page this Question was Asked From
Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jacks
- Steel
- 3001 - 4000 lbs
- Electric Jack
- Bolt-On
- 1 Jack
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 4 pin holder
- Search Results: spare tire mount
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Search Results: 1755892
- Search Results: mr27zr
- Search Results: anti~rattle shank trailer hitch ball mount
- Search Results: universal anti~rattle lock trailer hitch lock
- Search Results: hitch anti~rattle
- Q&A: Can Leaf Springs be Placed in Overslung Configuration for a 2022 Grand Design Reflection 31MB
- Shop: Replacement Roller Tube Endcap for Solera Power RV Awnings - Black - Qty 1
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: etrailer Electric Trailer Jack - A-Frame - 18" Lift - 3,500 lbs
- Shop: etrailer Electric Trailer Jack - A-Frame - 18" Lift - 5,000 lbs
- Shop: Replacement 12'1" Fabric for 13' RV Awning - Universal - Solid Black
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Video: Progressive Dynamics Pure Sine Wave Inverter Install - 2007 Four Winds Dutchmen Motorhome
- Video: Feature Breakdown: Trailer Spare Tire Mount by Dutton-Lainson
- Q&A: How to Tell if Progressive Dynamics Converter is in Lithium Mode
- Q&A: Replacement Spring for 2020 Grand Design Reflection 300RBTS
- Q&A: How Does The etrailer Electric Trailer Jack e55ZV Hold Up In Cold Weather?
- Video: All About the Replacement Drive Head Pin for Solera Power RV Awnings
- Q&A: How To Attach Safety Chains To Trailer Tongue
- Q&A: Replacement Circuit Board For WFCO 8955
- Video: Replacement 6-Amp Auto Reset Breaker for Lippert Power Stabilizer Jack: The Breakdown
- Q&A: Manual Crank Handle Replacement for FIC-3500 Electric Trailer Jack
- Video: Review of the Wire Frame Clip
- Video: Installation Guide for the CE Smith U-Bolt Kit - 2020 Grand Design Momentum 5W Toy Hauler
- Video: Comprehensive Review: Hopkins Heavy-Duty, Coiled Trailer Connector Adapter