Search: 1755892   >  

Hello Mark. Based on what I could find online, the Dexter 072-042-00 is a standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated for 1,750 lbs. To replace these, I recommend you use the 3-Leaf Double-Eye Spring #e57SR.…

The shock mounts for trailer suspension are not available as replacement or independent parts. You would need to purchase kit #LC281255 or #LC281281. Another option that bolts to the frame of a 5th wheel are the Timbren Trailer Suspension…

The Equa-Flex Cushioned Equalizers part #LC279689 is the best suspension upgrade option for a Keystone Raptor 3712 Toy Hauler and what I recommend that you use as it will be a direct fit replacement. The Equa-Flex is pretty much the same thing as the…

The black wire from the break away switch will connect to the blue wire from the break away box, as shown in the provided diagram. By 'brake wires' I'm assuming you're speaking of the wires connected to the brake magnets on your brake…

We do carry the Lippert hydraulic pump 172911 with the part number #LC58TF.

The hole in the yellow octagon is offset from the center which when installed in the slotted hanger like the part #LC303918 gives you the ability to set an exact alignment with the other sides hanger but using the same configuration by simply…

Grease seal set #RG06-050 is what you will need. These are double lip seals, just like what you have (the spring indicates that) and the dimensions are all the same including the 1/2 inch width.

What I think you are asking is, will you need a slide type hitch for the 2022 Ford F-250 Super Duty with the short bed, 6-3/4' length that has the OEM Prep Package (puck system) when towing a 5th wheel RV. The short answer is no you do not have…

When a trailer leaf spring is well worn it can become elongated. Springs can flatten out and become as much as a 3/4-inch longer, measured eye to eye, than when they were brand new. So the correct replacement spring for your suspension might measure…

Your tandem axle utility trailer will likely have an equalizer like the Curved Equalizer #TREQ104. These would have been held in place by 3" Shackle Bolts #166081 and Nylon Bushings #721590 and Shackle Links #LC122487 on the ends of the…

Equalizers like the ABS Fasteners #A2252CB-GALV actually will not carry a max capacity, but I can definitely say they will work with your weight rating. As long as your current equalizer measures 7-3/4 inches from center to center of the holes…

The Replacement Cam Lock Cylinder #295-000004 is measured at the threads, so you have done it correctly. I went to the warehouse and got the same measurement as your photo, 1-1/8". You would not be able to order these cylinders to match your…