Replacement Locking Core and Key for Toolbox

Question

Question:

I bought a tool box at a liquidation place and dont have the keys for top tool box the numbers on the Keyholes are A22 and A03

asked by: Patty

0

Expert Reply:

I do have a possible option for you but we do not carry replacement parts for Dewalt tool boxes. Instead, I recommend replacing the locking core with something like part # UWSLOCKCH501. You may need to reuse your existing latch in order for this locking core to work.

I have attached a few dimensional photos to help you determine compatibility as well.

expert reply by: Conner L

0

click to enlarge

Answer 1

There are several different lock and key replacements for UWS toolboxes and each one is different from the next. There is a chance you could end up with the same lock and key that you already have on the box but you would just need to order a…

view full answer...

Answer 2

The cam is not removable - it is riveted on - from the Replacement Lock Cylinder for UWS Toolboxes w Square Paddle Handles - CH503 #UWSLOCKCH503.

view full answer...

Answer 3

I recommend replacing the cam locks on the toolbox with some new ones especially if the keys to yours are floating around out there somewhere! We have cam lock #CAM44340 that uses a flat key (2 keys included) and it is 5/8 inches thick.

view full answer...

Answer 4

I did confirm that the replacement lock cores for UWS toolboxes like the #UWSLOCKCH508 does in fact use the rivet you referred to, but these are the only locks we've got that are confirmed to work with a UWS toolbox. We also added this photo to…

view full answer...

Answer 5

It is hard to say if this is an exact fit since we do not carry RK locks, but my research tells me that the closest match is Replacement Lock Cylinder for UWS Toolboxes w Square Paddle Handles - CH504 #UWSLOCKCH504. You will want to compare this to…

view full answer...

Answer 6

The Replacement Lock Cylinder for UWS Toolboxes with Square Paddle Handles, part #UWSLOCKCH501, you have referenced, will come with a pair of the key #CH501. If you order 6 of these locks they will all come with the #CH501 keys, so they will be keyed…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Locking Core and Key for Toolbox

Product Page this Question was Asked From

Continue Researching