Installing Trailer Wiring on a 24V System of a Military Hummer --1987 M998 hmmwv
Updated 09/11/2017 | Published 09/08/2017
Products Featured in This Question
Question:
I have a military hummer which I am attaching a trailer to. It is a 24v. I am wondering what/how to connect wiring.
asked by: Frank
Expert Reply:
I've attached an article as well as a photo to assist, but you will need to add a step down converter between your light functions, and add a 24V relay between the cold side of your brake light switch for your brake controller if you will be using electric brakes on the trailer.
There isn't an easy wiring harness with this converter already installed, so I recommend you use the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead # C58044 (you will need to get the step down converter and install in line) to give you a 4-way connection. Then you can use the # ETBC7 to give you the wiring for a 7-way and brake controller. I've attached the article to assist in how you connect this differently based on your 24V system so your controller receives the proper power, the stop light signal is delivered properly to the controller, and then the output will be the correct voltage because you took care of that on the front end of the controller. For a brake controller, I recommend the Tekonsha Prodigy P3 # 90195.
Only if you are using a 4-way trailer running at 24V (which cannot have trailer brakes) will you have the ability to just splice in and then use lights like the Miro-Flex LED Trailer Stop/Turn/Tail Light - 12 Diode, 24 Volts - 4" Round - Red # STL23R24B.
Let me know if you have further questions.
Product Page this Question was Asked From
Miro-Flex LED Trailer Light w/ Reflector - Brake, Turn, Tail - Submersible - Round - Red - 24V
- Trailer Lights
- Tail Lights
- Stop
- Tail
- Turn
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4-5/16 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tekonsha BRAKE-EVN Trailer Brake Controller w/ Plug-In Harness - 1 to 4 Axles - Proportional
- Shop: Brake Controller
- Shop: Viair Portable RV Air Compressor Kit for 5th Wheels and Travel Trailers - 150 psi - 2.30 CFM
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Search Results: tekonsha 90195
- Search Results: 2 inch boat winch strap
- Shop: BoatBuckle Boat Winch Strap with Latch-Lok Hook - Loop End - 2" x 20' - 4,000 lbs
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - Extra Heavy Duty - 4,800 lbs.
- Search Results: coupler pin
- Search Results: padlock
- Search Results: 8 lug
- Search Results: bulldog hitch
- Search Results: boat trailer brake kit
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Shop: Trailer Hitch
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Should I Get a Proportional or Time-Delayed Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Shop: Towing Mirrors
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Finding the Right Trailer Wiring Harness
on Trailer Lights
