Can I Use The Vertical E-Track E19146 In The Horizontal Position For My Covered Cargo Trailer

Updated 05/04/2011 | Published 05/03/2011

Products Featured in This Question

Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1

(1197)

$21.59

Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1

(1197)

$28.16

Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs

(896)

$5.45

Question:

I just bought a used 6x12 covered Cargo trailer and I would like to install E-Track on two sides. By design they have built in a 3/4 piece of plywood 4 wide at the right level, but horizontal E-Track is 5 wide. Can I use the vertal E-Track on the horizontal as it would fit? Pros and cons and any suggestions would be GREATLY appreciated!!! Thank you,

asked by: Dennis

Expert Reply:

My contact at Erickson confirmed that you are definitely able to use the Vertical E-Track # E19146 in the horizontal position.

The advantage for you is that it will mount to the space you need it to fit. The only disadvantage of using the Vertical Track # E19146 is that there are less anchor points to hook into than the Horizontal E-Track, part # EM59150.

To connect straps to the E-Track, you will need to use E-Track 2 Inch D-Ring, part # E59143.

I have linked a video review of the D-ring for you to review.