Availability of Wheel and Tire Size 16x6.50-8 on 4 on 4 inch Rim

Question

Question:

Have been asked to come up with a 16x6.50-8 tire and rim combo, the rim is a 4 bolt pattern. Do you have such a product? Thanks,

asked by: Paul S

0

Expert Reply:

We have just what you need. The part # AM3H200 has the tire size you need of 16x6.50-8 and is mounted to a rim with a 4 on 4 inch bolt pattern.

expert reply by: Jameson C

0

Answer 1

Hello Genia, thanks for reaching out. The Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C #AM3H200 will work with a 1" spindle, provided the spindle is fitted with a 4 lug hub like part #AKIHUB-440-2-G-1K.

view full answer...

Answer 2

A 4 on 4 inch bolt pattern is measured diagonally on center. The first number indicates the number of lug holes and the second number indicates the diameter of the circle that those holes sit on. Check out the wheel bolt pattern help article that I…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

view full answer...

Availability of Wheel and Tire Size 16x6.50-8 on 4 on 4 inch Rim

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching