How to Pick Out Replacement Hub for 2016 Magic Tilt Trailer

Updated 11/09/2015 | Published 11/08/2015

Products Featured in This Question

Replacement Trailer Hub Bearing - L68149

(2036)

$16.57

Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel

(16)

$66.82

Question:

I need to replace the Hub plus associated parts for a 2016 Magic Tilt trailer. The trailer hold a 23 foot boat with two axles and 4 tires/ One of the hubs is totally destroyed including the bearing and parts The hub is 6.5 inches wide It has 5 lugs measuring across two furthest lugs they are just about 4.5 inches apart. It has 15 inch tire The axle is tapered. The seal inside diameter is 1 and 5/8 inches The inside axle diameter is 1 and 3/8 inches The outside axle diameter is 1 inch The hub itself is 4.5 inches thick Im looking for a replacement hub that includes all the pieces including the grease cap.

asked by: Chris B

Expert Reply:

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.

Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride. The seal dimension you listed is a little too big for being a standard size so getting a more exact dimension would be required. Hopefully it's actually 1.73 inches. Then a hub like the part # Q-HUB84545 would most likely fit as the rest of the dimensions you listed seem pretty close to what this would fit.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

expert reply by: Jameson C