Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 part number: Y00425
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Black powder coat finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 50" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06179
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006179 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y48FR
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006203 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06179
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y48FR
Average Customer Rating: 4.8 out of 5 stars (2287 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts1768648
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: John11/16/2023
2015 Mazda 3
For a 2015 Mazda 3, 4 door sedan. I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads. Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.1693613
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car. 735696
Follow the instructions, and you can't go wrong on the self installation1757391
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too. 367973
Fit our Subaru Forester perfectly. Install was a breeze.3137277
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.844968
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.1051573
Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.1005706
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof. Thank you etrailer. 837388
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.1672086
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: Jacob08/01/2021
Really well made, great fitment, a little complicated instructions, but perfect install when they’re followed closely.1111144
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
For your 2018 Toyota Camry with a naked roof and the glass roof we have the Yakima Roof Rack part numbers # Y00425, # Y28TR, and # Y06192 which is a fit for your roof configuration and as long as you don't open the roof with the rack installed you'd be fine.
Inno does not have a rack that fits your vehicle configuration. view full answer...
I assume since you are asking about crossbars that your 2020 Mazda CX-5 has the factory roof rails which cross bars mount to, and the Yakima # Y00425 fit. You will need the # Y00425 Crossbars, the # Y64AR Towers, and # Y39AR Fit Kit.
These cross bars are adjustable and removable, however the silver finish will match your factory roof rail and you may decide it looks good enough to leave on all the time. The crossbar's aerodynamic shape creates less wind noise than traditional bars. view full answer...
I have a way for you to use longer crossbars for a roof rack on your 2011 BMW 3 Series but since the Thule crossbars have a limiting slot on the underside we need to use a different brand roof rack system and for that I recommend Yakima as they're the only ones with a slot all the way through so you can literally fit any crossbar length.
I'm only seeing from all of our manufacturers that a 2011 BMW 3 Series has raised rails so for that Yakima recommends the following parts (if you have view full answer...
We have a variety of roof rack options that fit your 2017 Ford Edge with the glass roof but I really like the Yakima JetStream system because it's fine-tuned to fit your vehicle like a glove and keep the crossbars level with each other. The correct parts will depend on if you have the flush rails or a naked roof.
Flush Rails
50" JetStream Crossbars - # Y00425
SightLine Towers - # Y64AR
SightClip Fit Kit - # Y79AR
Naked Roof
60" JetStream Crossbars - # Y00426
BaseLine Towers - view full answer...
While the search bar is a great way to look up different products, if you're wanting something designed to fit your 2021 Acura RDX with the factory raised rails it's best to use our fitguide system to sort through the vast amount of choices.
The Thule AeroBlade Edge Crossbar TH7602B is not a fit for your vehicle but since you have the factory flush rails I recommend using the Yakima JetStream roof rack which consists of the following:
50" JetStream Crossbars - # Y00425
SightLine view full answer...
I spoke with a contact at Thule, and they said that no roof rack is completely parallel with the ground. However, there are a few things you can do to ensure the tent is level. Most of these tricks are used by RVers for leveling their trailers.
First, park your car on terrain that will have your 2018 Acura MDX's front slightly lower to even things out.
Second, you can use a wheel leveler like part # TH307617. With your back tires on these, you'll achieve the level you're looking for. view full answer...
There are roof racks available for 2016 Ford Edges without rails, and they can be installed at home without any special tools.
I recommend Yakima's JetStream bars, which come as a kit that consists of:
Yakima JetStream Crossbars, 50 Inches part # Y00425
Yakima BaseLine Towers, part # Y28TR
Yakima BaseClip #102, part # Y06102
Yakima BaseClip #139, part # Y06139
Make sure to order both BaseClip #102 and BaseClip #139 as they are two separate kits, one for the front and one for view full answer...
Yakima has a roof rack that fits the flush rails of your 2020 Kia Soul X-Line with the Jet Stream rack part numbers # Y00425, # Y00145, and # Y44FR that you referenced. This does not attach to the mounting points you mentioned but does clamp to the flush rails like you see in the picture I attached. view full answer...
If Thule still made fit kits for your Rapid Aero Towers you would likely just need a fit kit, but they stopped making those towers and fit kits in 2009 as you stated so no vehicles newer than that have a compatible fit.
For your 2016 Mazda 3 if you have fixed mounting points the only roof rack we have available is from Yakima using the JetStream bars either part # Y00425. Then use parts # Y53TR and # Y00248 for the towers and landing pads. view full answer...
The Yakima JetStream Crossbars # Y00425 (black) will give you the peace and quiet and aerodynamic wind resistance you need. My research on your 2019 Toyota Highlander revealed that your vehicle has either flush factory rails or naked roofs.
On your naked roof, in addition to the bars, you will need:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 (you will need to order two sets of these)
For mounting view full answer...
A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts:
- Yakima JetStream Crossbars - Aluminum # Y00425
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189
- (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204
The reason why the Yakima setup is because the aerodynamic view full answer...
Yes, there is! To add a roof rack to your 2023 Subaru Forester with no roof rails, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points- Qty 4 item # Y53TR
Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248
view full answer...
For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
view full answer...
It looks like to mount the Yakima JetStream Crossbars # Y00425 to your 2023 Volkswagen ID 4 you're going to need the RidgeLine Towers for Yakima Crossbars # Y00145 with the RidgeClip 35, but the RidgeClip is not available anymore.
Instead, I'd recommend going with the Thule WingBar Evo Crossbars # TH711300, with the Evo Flush Rail Feet for Thule Crossbars # TH710601, and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet # TH28ZE.
These crossbars are identical view full answer...
For 2012 Toyota Sienna I recommend going with the Yakima JetStream roof rack setup. This mounts to the raised rails on your vehicle and it uses straps for the rails as opposed to the Landing Pad setup:
50" JetStream Crossbars - Black # Y00425
TimberLine Towers - # Y33TR
Lock Core Kit - # Y07204 (optional)
You can mount an aftermarket rail system to the roof of your Sienna but you'll have to remove the OEM raised rails to accomplish this. If you choose to do that then you can use view full answer...
Great questions. I have a solution for you to use longer bars, but the Thule WingBar Evo crossbars only have a limited amount of space for the T-Slot on the underside where they connect to the legs and there isn't enough space for you to go with longer bars. So instead I recommend going with the Yakima JetStream system as the T-Slot on the underside for this system runs the length of the crossbar so there is no limiting factor.
50" JetStream Crossbars - # Y00425 OR 60" - # Y00426
SkyLine view full answer...
A lot of people use trailer hitches to carry bike racks or cargo carriers which is why we offer trailer hitches for vehicles like your 2019 Volkswagen Golf Alltrack like the Draw Tite part # 24949.
When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I recommend looking it up online. view full answer...
To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima view full answer...
I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier view full answer...
I have a custom fit roof rack by Yakima that is a confirmed fit for your 2018 Chevy Silverado 3500 that does not require any drilling; you'd want the Yakima JetStream roof rack that consists of part numbers # Y00426, # Y28TR, and # Y06122 which is a confirmed custom fit. view full answer...
Yes we have the parts needed to install a round bar Yakima roof rack on your 2021 Ford Edge that does not have rails or a glass roof. You'd need the following # Y28TR, # Y03536, # Y06102, and # Y06139 since you already have the # Y00409. view full answer...
We don't offer any aftermarket side rails for your 2016 Honda Pilot, but you can still install a roof rack.
Since your Pilot doesn't have the roof rails, you'll need a Yakima roof rack system for a bare roof that clamps to the inside top of the door jambs. This is a very effective mounting system that will work perfectly for your Pilot.
The most cost-effective rack uses round crossbars, you'd use the following parts:
Yakima Round 58 inch crossbars, part # Y00409
Yakima BaseLine view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
Yakima phased out the Q-Tower style roof racks so while we can help you reuse the round crossbars you have we don't have a fit kit for the towers you have now to fit your 2012 Toyota Prius. Instead the part numbers you need are # Y28TR, # Y03536, and # Y06117 to use with your round bars # Y00409. view full answer...
We have parts to fit your Yakima round bars on your 2015 Nissan Altima, but not with the Q Towers as they were discontinued. According to Yakima you'll need the bars that you have already like part # Y00408.
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit # Y06137
BaseClip Fit Kit # Y06127
view full answer...
I have some potential solutions for you, however, there is not a Thule roof rack fit available for your vehicle.
For basic racks that are similar to Thule, I recommend Yakima's Round Bar or JetStream kits.
The base kit for your vehicle is made up of parts that will work with whatever bar style you choose. It is made up of:
BaseLine Towers for Yakima Crossbars, part # Y28TR
BaseClip Fit Kit for 2014 Nissan Altima, Front, part # Y06137
BaseClip Fit Kit for 2014 Nissan Altima, view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the view full answer...
The Yakima Baseline towers # Y28TR with the landing pad 19 will leave you about 5-1/4 inches from the top of your bar to the roof of your 2020 Honda CR-V. That being said the Yakima Showdown # Y04081 will sit about 9 inches up from the top of your bar when the kayaks are not loaded. view full answer...
If this were my 2020 Toyota Highlander the roof rack I would put on it would be Yakima because it will give you a larger amount of crossbar space than most racks so you can hold the most gear, it is extremely quiet, highly durable and looks fantastic. The rack that fits your 2020 Toyota Highlander with a naked roof is made up of the following parts:
- Yakima JetStream Crossbars # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06153 and # Y06132
- Same view full answer...
I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071.
If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130.
For flush mount rails you would instead need the 50" JetStream Bars # Y00425, view full answer...
Due to the roof design of your 2018 Jeep Grand Cherokee the only roof rack solutions we have require clips that mount to the door frame. You'll have to use the Baseline feet part # Y00146, the BaseClip fit kit part # Y06121 (quantity of 2), and then the roundbar adapter part # Y03536 to reuse your crossbars like the # Y00408. view full answer...
For your 2010 Ford Fusion, I recommend starting with the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars - Aluminum - Black # RR69YR which is a custom fit for your vehicle. Then I recommend using the Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount # S512 along with the Expansion Arm for Rhino-Rack J-Style Kayak Carrier # RRS512X giving you a secure fit for 2 kayaks on your small roof.
An alternative option is the Inno Kayak Carrier w/ Tie-Downs - J-Style view full answer...
There are many different parts that are needed for various vehicles, so it is difficult to piece together complete package kits for each and every vehicle on the road which is why you sometimes see a few parts that are required for a complete roof rack. If you go into our vehicle fit guide and enter in all of your vehicle's information, you should be able to see every part that is required for each roof rack system.
It looks like you were checking out the BaseLine Towers # Y28TR. These view full answer...
I can help you find the items you need to complete your roof rack. You will need the following items:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06117
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06174
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536
You can use your existing round crossbars, provided view full answer...
Since the Baseline Towers # Y28TR are only designed to be used on vehicles with a naked roof you are going to have to switch to the RidgeLine Towers # Y00145 to fit the flush rails on your 2018 BMW X5M. You will also need to get the RidgeClip kit #10 from Yakima as we no longer carry these clips.
I do see your roof will allow for either the 60" # Y00426 or 70" # Y00427 Jetstream crossbars. view full answer...
I have a great roof rack for you. Unfortunately, I confirmed with Thule that they do not have a roof rack system engineered to fit your 2021 Toyota Highlander XLT whether you have a bare roof or flush factory rails. However, we do have a similar Yakima system available.
If you have a bare roof Highlander, I recommend the following parts:
- Yakima JetStream Crossbars - Aluminum - Black - 60" # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit view full answer...
We do! The lock kit you need for the Yakima BaseLine Towers # Y28TR can be found on our site as part # Y07204. This kit comes with 4 matching lock cores, 2 keys, and the change key needed to remove and install the cores. view full answer...
Yakima recently discontinued their Q-Tower roof racks which means their Q clips are gone as well. You would need the Q7 clips part number 8000607 but they are not available anymore. We do have a solution that would allow you to still use the round bars you have though. For that you'd want the part numbers # Y28TR, # Y03536, and # Y06122 since you already have the round bars like part # Y00410. view full answer...
Thule doesn't offer a square crossbar roof rack fit for the 2021 Nissan Rogue at this time, I'm sorry to say.
The only roof rack fits we offer are from Yakima, you could construct a roof rack using the following parts:
• JetStream 50 Inch crossbars, part # Y00425
• BaseLine roof rack towers, part # Y28TR
• Fit Kit, part # Y06179
• Fit Kit, part # Y06161
Yakima doesn't offer a fit kit that uses the fixed points in your Rogue's roof. The fit kits use clips that grab the inside view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.