Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
Item # C55774
Retail:$53.16
Our Price: $32.90
You Save: 38%
Confirmed to Fit
2005 GMC Canyon
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (605)
- Q & A (0)
- Photos
2005 GMC Canyon - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Trailer Hitch Wiring
- 4 Flat
- 7 Round - Blade
- No Converter
- CURT
Quickly and easily install a 7-way and a 4-way trailer connector on your GMC Canyon with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides both a 7-way RV-style and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 5-pole and 6-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point behind rear bumper
- Plug in connector
- Includes mounting bracket and hardware
- Comes with protective covers for connectors
- Assembled in the USA
- Limited 1-year warranty
Installation
This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 7-pole and 4-pole connectors - to help prevent corrosion.
55774 Curt T-Connector - OE Multi-Socket Upgrade
Installation Details
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors - C55774
Average Customer Rating: 4.7 out of 5 stars (605 Customer Reviews)
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.by: Tim R01/01/2024
2010 Chevrolet Silverado
Very easy, plugged right into the uscar connector, drilled 2 holes for the bracket, done
by: Andrew W. 10/26/2018
2003 GMC Yukon XL
I am having a problem with the install of the three Curt trailer components I purchased. I intentionally bought all of the same brand assuming that they would work together. The problem is that the Curt wiring harness (part# C55774) is too long and rigid. When the 7-pin connector is installed in the bracket that comes with it, it measure 5 inches until the black wire protective sleeve bends (to go under the hitch receiver frame).
The no-drill bracket (part# C57202) is supposed to attach the harness bracket to the hitch. But it is only 6.5" long, and the hitch tube is 3" wide. So with the bracket attached to the hitch, there is only 3.5" of space left to mount the harness bracket so that the screw holes line up.
I am disappointed that this is the case, especially as I called etrailer to check that the parts I was ordering would work together.
It looks like I will have to discard C57202 and drill two holes into the bottom of the hitch and mount the harness bracket directly. This is what I wanted to avoid - having to drill holes.
by: David02/25/2024
2003 Mercury Mountaineer
This was supposed to be a plug in installation for my 2003 Mercury Mountaineer. No it wasn't. Completely different connector, and the wiring was 2 feet too short. Was able to use it after a bit of clipping and splicing.
by: Mike04/11/2018
2015 Jeep Grand Cherokee
Super easy, very nice! Great engineering, couldn’t have been any easier! The girls at etrailer are super friendly and very helpful! Great prices and quick shipping, too!!
Mike
4/13/2019
Great. No problems.
by: Clukero04/04/2024
2007 Chevrolet Silverado Classic
Excellent fit, oversized spare tire still fit underneath (285/70r17).
by: Martin04/22/2024
Product I ordered had an inaccurate description. Contacted customer service to return they would not send return shipping label so since the return shipping would have costed more than the part I threw it in the trash and ordered the part needed from another supplier. Needless to say I will not be ordering anything again.
by: Greg 04/20/2023
2006 Chevrolet Silverado
Very good, fit perfectly
Greg
4/21/2024
It has been working great, holding up well,the same as the day I purchased it. Great product
by: Dylan04/10/2021
Perfect fit. My truck was not equipped with a tow package so I was a little worried it wouldn’t fit. The wiring and plug were already there with a cap on it to seal it from dirt/water. Took the cap off and this harness snapped right in place. Also installed an etrailer hitch and new bumper. Very happy with the products and the installer tools and information provided by etrailer.com.
by: Danny07/31/2020
Harness was easy to install. The truck came prewired. It just needed the adapter. We dremeled our the back of the bumper (2019 Titan’s have the cut our outlined on the back side already). We had to dremel 2 side prices off the harness, but it slide right now. Then we drilled through the plastics bumper cover and the metal on the bumper and bolted the bracket to the bumper.
The 4 point is just fished between the license plate and the bumper. It was easy and it now looks factory. Very happy with how it came out! Install was a cinch!
by: John08/24/2020
2018 Nissan Titan
I have a 2018 Nissan Titan, and while the connector was a perfect fit for connectivity to the factory connector. The Curt T-Connector wiring harness was about 6 inches short from connecting to the factory harness when mounted on the trailer hitch bracket. So, I was forced to mount it on the opposite side by drilling holes in bumper.
by: Todd02/26/2024
2017 Ford Explorer
Always accurate parts and information
by: Matthew11/30/2017
If you have multiple trailers that either use a 4-way flat or 7-pin round connector and get tried of having to use an adapter go with this setup. I've had one on my other truck for a couple years and no problems with 'em thus far. You can technically use the old existing mount on the receiver hitch itself but the 4-way will dangle unless you ziptie it up.
by: Robert 04/10/2024
Perfect fit, works well
by: Kent R.06/23/2017
2002 Ford Excursion
My 2002 Ford Excursion 7.3L diesel had the original factory hitch and wiring harness. The quality and heft of the Curt T-Connector is impressive. I bet I get years of use without problems.
by: Michael 05/03/2023
2023 Honda Passport
Bought this because of the split 4 pin and 7 pin connectors. I’ve had so many 7 pin to 4 pin adaptors and would forget that I let my son or son in-law use it and had to buy another one when I needed it. This will stop me from the need to buy another adaptor, good for me not good for my son and son in-law when they come over to borrow the trailer. LOL, who am I kidding I’ll still go with them to the store and buy another one.
by: Brett C04/15/2024
2024 Ford Bronco
Great product and very helpful staff! Thank you!!
by: Rhonda04/17/2023
The actual trailer hitch was fine but the wiring kit was not the right kind. When I called to get a return authorization I was told that more than one half the cost of wiring kit will be deducted from my return for postage. I have never had to pay for returns to any company before. I will not be recommending your company
by: Caro H06/01/2021
Great product. Installed on my 2018 Jeep GC. Because of dual 4 pin and 7 pin connector I don’t need an adaptor when swapping out trailers/camper. Clean look to it as well.
by: Tom 06/03/2023
2005 GMC Yukon XL
I like how it has both 7-way and the 4 pole connectors. Looks nice too!
by: David 02/21/2024
2007 Ford F-150
Great product & customer service
by: Vernon 07/17/2023
Great fitment. Had a little difficulty getting to the right version of this but the amazing customer service at ETrailer helped me get to the correct one. Thank y’all! I love any business that’s not named after a rain forrest!
by: Gregg07/12/2022
The pigtail was easy to install and looked great. The problem was that it didn’t work without taking it to someone to program the computer to recognize it. That cost was going to be more than twice the cost of the connector. I still have it back in the box. I purchased a four wire flat connector and wired it up.
by: R G02/17/2024
Plugged right in and makes for a professional look
by: Greg01/11/2021
2017 Nissan Titan XD
There was no place on the new hitch to bolt the end to, which was a disappointment. For now I sip tied the end to the hitch in an area where it does not move.
by: Daniel09/08/2017
2004 Cadillac Escalade
Product just like it said it does, delivery just took long but is free delivery so is good, packed box came like bit out from the people delivered but localy everything works good
25
605
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Troubleshooting Trailer Brakes Not Working Towing With 2018 Ram 3500I am happy to help you troubleshoot your braking issue. Since the trailer brakes on the trailer work properly when hooked up to another truck then your most likely experiencing a wiring issue or defective brake controller on the truck side. Most of the time there is an issue with the pins on the 7-way connector on the truck. You want to make sure the pins are free of corrosion, if there is a bit of corrosion you can sand it off with fine grit sand paper. You also want to make sure the...
view full answer... - Replacement 7-Way Plug for 2009 GMC Sierra 2500There are no retaining clips and zip ties or duct tape may not hold the connector so the best option and what I recommend is to replace the factory 7-way of your 2009 GMC Sierra with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55774. This will plug right into your truck's factory tow package port and give you a permanent solution so you won't have to worry about a loose connection.
view full answer... - Trailer Hitch Wiring For 2023 Chevy ColoradoWhile we do have wiring for your 2023 Chevy Colorado, the hitch you mentioned is not a fit. For the wiring you simply need the plug-in Curt T-Connector Vehicle Wiring Harness # C55774.
view full answer... - Will the Curt T-Connector Vehicle Wiring Harness C55774 Fit a 2018 Ram 350Yes, the Curt T-Connector Vehicle Wiring Harness part # C55774 is a fit for a 2018 Ram 3500. The US Car Plug on the above harness is an industry standard connector so the trailer connector will fit just fine on a Ram 3500.
view full answer... - Recommended 7-Way Connector for 2011 Ford F-150 RaptorIt sounds like you are needing a 7-Way connector on your 2011 Ford F-150 Raptor. For this, I recommend the Curt T-Connector Vehicle Wiring Harness # C55774. This will plug right into the factory port on the truck, which is what appears you have found behind the rear bumper. Once the connection is made, you will have a fully functional 7-Way and 4-Way connector on your F-150. I have attached an installation video that you can check out. It is on a different vehicle, but you can watch this...
view full answer... - 2015 Ram ITBM F87 Fuse Blowing TroubleshootingI did a little bit of digging on the F87 ITBM blowing on your 2015 Ram Tradesman and mostly it looks like the issue is related to the wiring to the 7-way connector. There is a short on the 7-way wiring most likely either right behind the 7-way or the pins of the connector are dirty. If the 7-way has seen better days one solution would be to replace it with the part # C55774 which also comes with a 4-way attached to it.
view full answer... - Why Won't 4-Way and 7-Way Connectors Work with Trailer on a 2018 Jeep Grand CherokeeSometimes after installing some aftermarket wiring the Jeep "tow package" wiring circuit will need to be activated. This can only be done at a Jeep dealer and it sounds like this is what is going on. You can verify this by checking to see how your current wiring is connected. If everything is splice in then it would bypass all of the factory wiring and I am not sure why you would be testing and getting a signal but your Jeep isn't communicating with your trailer. If the 4-Way and 7-Way...
view full answer... - Can Curt 7-Way and 4-Way # C55774 Fit 2019 Chevy Silverado 2500HDThe Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55774 that you referenced is a fit for your 2019 Chevy Silverado 2500HD and would install easily by just plugging directly into the 7-way wiring that's present at the rear of the vehicle. I am not totally sure what you mean by taking the pin out of the two covers though. But this would attach to the lower portion of the rear bumper.
view full answer... - Replacement 7-Way Harness for 2011 Ford F-250 Super Duty If your 2011 Ford F-250 had the factory 7-Way, it sounds like you just need the Curt T-Connector Vehicle Wiring Harness # C55774. This connector will plug directly into the OEM tow package wiring harness and also provide you with a new 7-Way and 4-Way trailer connector. I have attached the written installation instructions that you can use for reference. If you are referring to the factory harness on your truck that this would plug into, then unfortunately this is not a part that we...
view full answer... - Does Curt 7-Way/4-Way T-Connector Fit 1999 Ford F-150 with Factory 7-WayYes, the Curt T-Connector Vehicle Wiring Harness # C55774 uses the standard US Car Connector (see attached photo) which you should have on your 1999 Ford F-150 (behind your current connector). This connector will just plug into place.
view full answer...
- Could Factory 4-Way of 2003 Ford F-150 be Cut Off After Installing Curt # C55774The problem you could run into if you cut the factory 4-way of your 2003 Ford F-150 off when installing the part # C55774 is that the wire still would be active and could short out if you are not careful. If you went this route you'd need to tape each wire up well so that they wouldn't short. Other option would be to just leave the 4-way and tape it up and out of the way.
view full answer... - How to Know If Vehicle Wiring Will Be Overloaded By Connected Trailer LightsIf you were using Curt T-Connector # C55774 and wanted to make connections at both the 4-pole and 7-way at the same time you could add the current draw of the two connected trailers/devices (like a tailgate light strip) to know whether this would exceed the rating of the circuits. The online manual for your 2015 F-250 indicates multiple separate fused circuits for the various trailer light functions. Fuse 10: 40-Amp for Trailer Tow Fuse 22: 30-Amp for Trailer Brake Controller Fuse 26:...
view full answer... - Replacement 7-Way Harness Recommendation for 2002 Ford F-250We have the Curt 7-way part # C55774 which is a fit for your 2002 Ford F-250 as a replacement 7-way. The harness is short and not a longer one designed to fit up to the truck bed like for a fifth wheel or gooseneck setup. I attached a review video for this harness for you to check out as well.
view full answer... - What is Length of Wiring of Curt 7-Way # C55774The wiring of the Curt 7-way part # C55774 that you referenced measures 15-3/4 inches in length.
view full answer... - 7-Way/4-Way for 2019 Honda Ridgeline with 7-WaySince your 2019 Honda Ridgeline has a standard 7-way you could replace it with the Curt # C55774 which has a 7-way and a 4-way.
view full answer... - Troubleshooting No Power to Newly Installed T-Connector on 2015 Jeep Grand CherokeeThank you for the purchase of the towing equipment for your 2015 Jeep Grand Cherokee. Since you aren't able to get the wiring to send power for the Curt T-Connector # C55774 and you have checked the fuses it sounds you need to take your Grand Cherokee to your nearest Jeep dealer and have them activate the tow package wiring circuit. This isn't always the case but is sometimes necessary.
view full answer... - Can 4-Way and 7-Way of 2021 Dodge Ram 2500 be Used at Same TimeYes, if you have the 7-way and the 4-way of your 2021 Ram 2500 in use at the same time you'd be totally fine.
view full answer... - Troubleshooting Running Light Circuit That's Not Active with Malone Trailer and Jeep Grand CherokeeIt's not uncommon for a single trailer wiring circuit not to work but if most of the circuits are active and only one isn't it wouldn't be the issue you described of having to have a dealer turn on the tow package. If this were the case none of the trailer wiring would be active. Since we know the problem isn't on the trailer that leaves the issue being on the tow vehicle side of the wiring. A very common reason for this is a dirty or corroded connector for that circuit which can easily...
view full answer... - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package LengthI went to the warehouse to measure and the 4-pole pigtail part # C55774 measures about 18 inches from the back of the 7-way plug to the end of the 4-pole connector. The wiring of the 4-pole connector that sticks out of the wire loom is about 6-1/2 inches. The overall length of the wire loomed wiring from the back of the 7-way plug to the end of the connector that plugs into the vehicle's factory port is 15-3/4 inches.
view full answer... - Which is More Common Trailer Wiring Connector 7-Way or 6-WayThe 7-way blade trailer connector is the most common connector for use with trailer brakes. The 6-way is typically only used with horse/agriculutral trailers but even then the 7-way is still pretty common. For a 2002 Ford F-250 we have the part # C55774 which gives you a 7-way and a 4-way.
view full answer... - Recommended 4 way and 7 way Combo Plug for 2016 Ford F-350 Super DutyIt sounds like you're looking for a combination 4way / 7 way plug for your 2016 Ford F-350 Super Duty to replace the factory towing wiring, which you can use the Curt # C55774 to do. This will plug into the US car connector plug behind your bumper and provide you with both a 4 way and 7 way connector on your vehicle to be used for different trailers that might have different wiring connectors.
view full answer... - Does Wiring Harness for 2018 Jeep Grand Cherokee Require Activating Tow Package Wiring CircuitIf your 2018 Jeep Grand Cherokee has the factory tow package and you are using the Curt T-Connector Vehicle Wiring Harnesse # C55774 you will need to go to your local Jeep dealer and have them re-flash your Jeep's computer in order to activate the tow package wiring circuit.
view full answer... - What Trailer Connector Should I use on my 2002 Chevrolet AvalancheTo plug into the factory connector on your 2002 Chevy Avalanche I really like the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774. This will plug into your factory connector and the big benefit is that it has both the 7-way and 4-way trailer connector so regardless of the trailer you're likely to have the right connection.
view full answer... - Can I Use Both the 7-Way and 4-Way Connectors at the Same Time on a 2015 Chevrolet SilveradoYou can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same functions on your boat trailer might be a little dim or the fuses might blow on those circuits. For a 7-Way and 4-Way connector that you can use at the same time I recommend using the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Video by:
Dustin K
Video by:
Michael B
Written by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
10/26/2018
The 7-way bracket that comes with the wiring harness part # C55774 is designed to be installed with the wiring harness bracket hanging below the no drill bracket part # C57202. Since you are worried about the loose wiring I would recommend using some wire loom such as part # 459075-1 to protect your wiring and zip tie any slack with zip ties part # DW05726-25. I know this is not the option you wanted but I feel it is better than drilling into the hitch.
Helpful Links
Accessories-and-Parts/Curt/C57202.html
Custom-Fit-Vehicle-Wiring/Curt/C55774.html
Tools/Deka/DW05726-25.html
Tools/Spectro/459075-1.html