Dress up your RAM with chrome ABS Quick Trim hub covers. Kit includes 2 front covers, 2 rear covers, and 40 replacement lug nuts required for installation.
Hey Gary, I'm a little confused as to what you're asking. Are you looking for front or rear hub cover? All of the 19.5" caps we have will be the 10 lug like I think you're wanting. Now that being said, technically these covers are…
Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…
Yes, it will! I checked with Phoenix USA and their Front Hub Cover w/ Pop Out item #PXQ822F, you were looking at, will work with your 2008 Fleetwood Southwind with 8 lug 22.5" wheels since your factory lug nuts are 33mm.
I've attached some dimensions below to help you determine fitment of the Brophy Camper Scissor Steps #AS24 with your truck bed camper. The mounting bracket is 24" long x 1" tall (1-3/8" tall if you include the V-Clamps) so…
Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…
I can definitely help you determine what bolt pattern you have. The most common 8-bolt patterns are 8 on 6-1/2 and 8 on 275mm. With that being said, the Phoenix USA Rear Hub Cover w/ Pop Out #PXQ822R only fits conventional wheels that have an 8 on…
As long as the wheels on your, 1994 Chevy K 3500, are 16" in diameter and have hand holes, the Wheel Masters Wheel Covers item #WM3160B0 that you looked at will fit. These will not fit any other wheel size or lug nut pattern.
Hey Randal! We don't have wheel simulators only wheel covers and the only set we have that will work is snap on. They are the Wheel Masters Wheel Covers item #WM3160B0. These are a universal product and are designed to fit wheels that are…
There is no difference between the front and rear covers that come with the #WM3165B0. Each one is the same as the #NA7165B1 which fits the front or the rear.
The Tow Ready Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector #20119 that you referenced is a replacement for the factory installed tow package socket. This item uses a round U.S. Car Connector to plug in to the vehicle harness behind the…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Filters
