1998 Isuzu Rodeo Windshield Covers

Hey Harry, so the side window shades of the part #WT87QV basically just push up into the window area and from being sized just right and being super lightweight they hold themselves into the area. Basically it's a friction fit that gets held…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Darin, the 30k and 25k versions of the Curt PowerRide fifth wheel hitches use different leg and head kits so they are not interchangeable. If you wanted to upgrade to a 30k hitch you'd need an all new hitch with the part #C48BR. Do you have a…

Joe, I was able to track down a diagram and find out that the Telesteps Telescopic A-Frame Ladder #TE37FR is 15.4" wide all the way up and down until it reaches the base where it extends to 30.1".

Hey Matthew, yes the Timbren kit part #TTORSEQ1 that you referenced would work great on a vehicle that is lifted but you have to use spacers to take up that extra space created like with the part #T68MR. How big of a lift does your vehicle have?

Hello Connie. The bottom straps of the WeatherTech Mesh Safety Barrier for Pets #WT96UQ go around the inner leg of the driver seat frame. Same thing for the passenger side. I have included a few snips from the instructions that you may find helpful.…

Hi John; since that is a Lippert Rhino you will need the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert Rhino - 30,000 lbs - 6.5K TW #GY76PR. This is the correct pin box based on your GVWR. The distance from the center of the king pin to the…

I reached out to my contact at Demco and he said that the Kar Kaddy SS #DM9713045 can be assembled by 1 person and that it typically takes about 3-4 hours. If you are a retired auto mechanic then it will likely be on the lower end as you have…

Yes, the Adco Windshield Cover #290-2423 is a universal cover for Class C motorhomes and is confirmed to fit your 2013 Mercedes-Benz Sprinter 3500.

Hey Dennis, The bracket the mounts to the trailer wall would need to be installed at the factory and unfortunately isn't an option aftermarket. These are relatively new so I'm assuming after enough people complain to Lippert they'll start…

Hey Jim, since your Winnebago is built on a Mercedes Sprinter chassis the windshield cover you would need is the part #290-2523 which is for sure the correct size.