Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Hey Kim! Congrats on the new-to-you Voltage! For your 2014 Dutchmen Voltage 3905, I'd recommend the JR Products Automatic Changeover 2-Stage Propane Regulator #37207-30395. This regulator automatically switches between your propane tanks when one…
The Kat's Heaters Oil or Transmission Pan Heating Pad #KH24050 is very flexible and should have no issues conforming to your oil or transmission pan's curved surfaces.
Hey Terry, we can confirm that the Kat's cartridge heater part #KH11811 does fit your 2023 Chevy Traverse. Since it installs in a cartridge the antifreeze fit tip does not apply like you mentioned. The cavity on the engine block to use is the RL…
Hi Pete; all you need to do is put NSCG silicone grease G-624 on the #KH11813 cartridge. This block heater doesn't need any gasket maker, and you definitely do not want to apply it to the heating element. The clip will lock it in place so gasket…
It sounds like you are wondering if the Kat's Heaters Custom Fit Engine Block Heater #KH11811 features a temperature control. Please let me know if you are looking for something else. This engine block heater does have an internal thermostat that…
There isn't a specific amount of time it takes the Kat's Heaters Oil or Transmission Pan Heating Pad #KH24050 to heat up in certain temperatures, because there are other variables at play as well which affect it, such as wind. That said, this…
The Kat's Heaters Oil Pan Heating Pad #KH24050 attaches to the oil pan with 3M tape. I have included a picture that shows the back of the heater where it attaches to the oil pan. If you want something that is magnetic I recommend #KH1155 which…
The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for your 2008 Scion tC. To install: 1) Locate cartridge hole on the engine block. 2) Clean cartridge hole of all debris. Use…
I confirmed with Kat's Heaters that the port location for the Custom Fit Engine Block Heater #KH11815 on your 2018 Ford F-150 with the 3.5L V6 EcoBoost engine is on the right front of the block. I went ahead and attached a diagram that shows this…
Hey Stan, with the heaters like the #KH11465 Kat's does recommend coating the o-ring with NSCG silicone grease G-624. We have white lithiuim grease that would work great for this with part number #L11354.
