No, I am sorry it will not Rich. The Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 item #LC349975 only works with the Lippert Ground Control 3.0 item #LC675817 and the item #LC358590 systems. We do not have a replacement bracket for…
The load range tire used is going to depend on the gross trailer weight capacity, which should be on a sticker or plate near the front of the trailer frame or in the trailer's literature. It probably also indicates the load range, or at least the…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
We have just what you are looking for! I recommend going with the Westlake ST235/80R16 Radial Tire w 16" Bobcat Aluminum Wheel - 8 on 6-1/2 - LR E - Black #LHAWSO513B which have a tire with the exact same overall dimensions of your 9.5R16 tire…
For your Blue Ox base plate, and your Blue Ox Avail Tow Bar #BX7420, you can use the Roadmaster Tow Defender Protective Screening #RM-4750. This is specifically designed to work with Blue Ox Tow Bars, and Blue Ox base plate brackets. I have included…
The best hitch for your 2021 Grand Design 22 MLE XLS Imagine travel trailer is going to be the Curt RV Bumper 2" Trailer Hitch item #E-100. This hitch is custom fit and bolts directly to your Grand Designs rear bumper with included hardware. The…
We do have something like that. The Lippert Spare Tire Winch with Offset Cable #LC159056 use the Crank Extension for Lippert Spare Tire Winch Assemblies #LC1315411 which attaches to the winch. You would then use the Replacement Crank Handle for…
I do have an option for you but the Reese Reese Multi-Fit Motorhome Hitch part #5350 is not confirmed to work with a C-Channel frame. I recommend to use Adjustable Width Trailer Hitch Receiver for RVs part #C13702 which is designed to fit 18-51 inch…
The distance from the two bolt holes on each side bracket for the Curt Adjustable Width Trailer Hitch Receiver #C13702 is right at 8-5/8" (center to center). I have also attached a diagram to assist. This adjustable hitch will fit frame widths…
You can use the Replacement Crank Handle #LC285324 with the Lippert Winch Extension #LC1345411. Keep in mind that you will also need a cotter pin such as part #165649 to hold the extension in place, if you don't already have one.
I think you may be going about replacing your hubs backwards. The only way to do it is to first determine what spindle you have on the trailer and then find the correct hub to fit it by either using the bearing numbers or the dimensions of the…
There are usually only a few small difference between a 5,200 lb and a 7,000 lb trailer axle but not every two are the same even with the same capacity as different manufacturers make them to different specs. The actual axle thickness can play a role…
