Hello Anthony, Since your 2016 Ford F-250 Super Duty has the standard size bed 6.7' you are going to want a sliding hitch to ensure that you have the clearance on those sharp turns, no one wants to ruin their vacation by taking out the cab of…
Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…
Hello Todd. Yes, there is a 1-7/8" ball available for the Weigh Safe Hitch w/ Built-In Scale #WS88RR. For that, you can use the following: Replacement 1-7/8" Hitch Ball for Weigh Safe Ball Mounts - Stainless Steel - 7,500 lbs #WS66KR Leave…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Hey David, great questions! The Under-Bed Rail and Installation Kit #RP67KR comes with both the 30183 and 30924 parts of the hitch system and are the same as the Ford OEM puck system. All you need is this kit and you'll have the 4 pucks and…
Hello David, thanks for reaching out. So the daystar cradles are recommended if you plan to go offroad and do not want to limit the suspension travel. We do have an Air Bag Kit/Cradle/Compressor setup that will work with your 2024 Ford F-150 Tremor.…
With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…
So long as you do not have a dually the answer is yes. The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL29DQ are compatible with in bed hitches like the B&W item #BW73FR when installed on a 2025 Ford…
Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…
I can definitely help you out with the Curt 5th wheel base rails and bracket kit that fit your 2024 Ford F-350 Super Duty. The correct part number - which I verified directly with the manufacturer for you - is the following: - Curt Custom Fifth Wheel…
Hey Joel! Yes, the Rhino-Rack Vortex Crossbars #RRVA180B-RRRLT600 are compatible with the T-slot rails on the RetraxPRO XR Hard Tonneau Cover #RTT-80383. This cover is designed for a 6-3/4' bed so as long as you have that bed length on your 2024…
It sure is Michael! The TorkLift item #TL87DR includes both front and rear tie-downs for your 2024 Ford F-350 with a 8' bed. Please note that the item #TL87DR are not compatible with factory flip-out steps that are mounted under the bed. What…
