Custom Fit 2022 Ford F-350 Super Duty Accessories

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

No, I am sorry it does not. I just spoke with Lippert and none of the Curt Helux Shock-Absorbing 5th Wheel Pin Box like item #C73RJ are compatible with gooseneck adapters like the Anderson Ultimate 5th Wheel Hitch. You would need to use a standard…

Hey Dan, I would go with the 5,000 lb rated part #AL35FJ for your 2020 Ford F-350 as it will give you the support you are wanting without affecting suspension height like you had read about.

Hey Randy, we have what you need but you will need to measure the width of your pin box to determine which capture plate you need. If it's 13-3/8 inches wide you'd want the part #PUL26RR or if it's 13-5/8 inches you'd need the part…

For the Reese Sidewinder #RP34FR during the initial installation you can apply white lithium grease to the inner tube of the turret to ease installation. White lithium grease will need to be applied to the wear plate (between the turret and the arm)…

Hello Stu, thanks for getting in touch. For a travel trailer approved e-bike rack, what I recommend is the Swagman E-Spec Bike Rack #S94FR. This rack has a reenforced shank, making it suitable for RVs and travel trailers. It has a 70 lb per bike…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Hello again Bill; you can add the Curt Q25 #C16566 to your 2022 Ford F-350 puck system using the Adapter Rails for Curt 5th Wheel Hitch #C88KR. The adapter installs in the puck system and provides you with rails to install and use the Q25.

The wheelbase won't be a problem for the Inno Tire Hold HD Bike Rack #IN25RR but the fenders will be. If you don't have fenders on your Lectric 3.0 then you can definitely use this bike rack. However, I have only seen it with fenders so…

Yes, it will Art! Actually, the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs item #AL86KV will only work with the dually models of the 2022 Ford F-350. These were specifically designed for just that application according to Air Lift. I…

Hey Brad, the capture plates for the PullRite SuperGlides are pin box specific. Can you give me the brand and model number of the pin box on your Alpine 3701FL? Unfortunately, this information isn't publicly available. From my research, it looks…

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…