The best hitch for a 2023 Ford Mustang Mach-E is the Curt Trailer Hitch item #C77ER. This hitch is custom fit and bolts to your Mustang with included hardware. It is a class III hitch with a 2" receiver that is great for towing or hauling…
Hey Jean, great questions! So the only real key differences between the Draw-Tite #DT72GR and the EcoHitch Hidden Trailer Hitch Receiver #EH66SR is that the EcoHitch is rated a bit higher for the tongue weight, and the Draw-Tite has a removable…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
I spoke with my contact at Dexter and he said the 21-37 oil cap is obsolete and was replaced with the 21-36 oil cap, #RG04-270. This cap includes the o-ring and plug.
Congrats on the new car! The best hitch for your 2023 Mustang Mach-E is going to be the EcoHitch Hidden Trailer Hitch item #EH66SR. This hitch is custom fit and bolts to your Mach-E with included hardware. This is a class III hitch with a 2"…
As we haven't had the chance to install either the Curt #C77ER or the Draw-Tite #DT92MR on a 2021 Mustang Mach-E, I went out and measured from the center of the first bolt hole to the end of the receiver opening on both hitches. The Curt will sit…
It sounds like you have a total load of 325 lbs which is within the hitch capacity of a hitch like #e98855 on your 2020 Honda Odyssey. Tongue weight is the relevant capacity when it comes to bike racks because they put a vertical load on the hitch.…
I do have a similar option for you but the Thule AeroBlade Edge Roof Rack is discontinued and no longer available. There is no way to use this on a 2022 Ford Mustang Mach-E but we do have a like option in the Thule WingBar Edge Crossbar System which…
What you're wanting to do can be accomplished, but we'll need to get you some different equipment because you never want to use 2 adapters, and from my experience all of the dual receiver options using the style you're showing in your…
For the Yakima Rack and Roll Trailer part #Y08107 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits…
The Malone MicroSportXT Trailer - 13' Long - 78" Crossbars - Retractable Tongue - 800 lbs #MPG460XT has crossbars that are 12 inches above the frame. I reached out to the manufacturer and they sent me the attached photo as well as stating…
The distance between the top crossbar of your Malone Trailer #MPG460XT and the bottom of the bars on the 2nd Tier Kit part #MPG474 is 32 inches. I confirmed this with Malone.
