Great question Thad! So the 6" you're referring to only applies to the drop, and the 4 3/4" refers to the rise. The drop would be considered if the ball mount was installed right side up with the part the ball mounts to closest to the…
Both the RidgeBack #Y02459 and FullTilt #Y02463 are high-end hanging-style racks from Yakima but in this case the FullTilt has a few extra features so I recommend going that route. Both racks have very similar features as far as tilting/folding ease…
The etrailer brand #e98854 Class III hitch would install using hardware that is already existing on the vehicle, so no separate hardware is needed. You can see this by consulting the linked installation instructions or taking a look at the linked…
The Timbren Spacer kit part #TA25723-90AD00 that you reference does not come with a bolt to install it. The Timbren kit part #TDVRRT does come with a bolt but if it was not long enough you'd have to source a bolt local to you that is longer than…
The Timbren suspension #TDVRRT you referenced will help with vehicle sag and it won't change the ride height even when your Caravan is empty, In addition, it will improve your suspension, handling and ride quality, but you still shouldn't…
This is a fairly common issue with the Town and Country. However our suspension kits like #TDVRRT are not designed to work as a lift kit for the rear end of your truck. They are designed to help reduce the strain on your rear axle when you are…
If you want to replace your equalizer with an integrated suspension enhancement, you will need to update other components within your system for the correct fit. This will most likely require repositioning your axle hangers if you wish to use that…
The Lippert Components Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle #LC281255 is compatible with the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00. This over-under kit If you have 3 inch axles ( lbs) then…
The installation process of the Lippert Components Bolt-On Shock Kit part #LC281255 will be the same for a single axle trailer and a tandem/triple axle trailer, just repeated. When installing the shocks, you want to point them away from the shackle…
The mounting bracket for the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks #LC281255 for a 2-3/8" axle measures 1-1/2" while the same measurement for the part #LC281281 for a 3" axle measures 2-15/16". Attached are photos to…
I will be happy to explain how to install the shock kit #LC281255. In addition to the instructions below I have also included a picture of the actual instructions. 1. Raise trailer and jack up the axle to release pressure on the springs. 2. Remove…
