Videos
for Honda Odyssey Owners
Help Articles
for Honda Odyssey Owners
Expert Answers
for Honda Odyssey Owners
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I was able to locate Fan-Tastic Vent 8613-01, however that number came back to it being the document number of the manual which covered 8 different vent/fan options. If you can provide me with the model number of your vent (which can usually be found…
view full answer...When wiring the 7-way receptacle on the back of the vehicle to the vehicle's battery you want to extend the black power wire to the positive side of the battery terminal via a 40 amp circuit breaker. The white wire (ground) from the 7-way…
view full answer...Unfortunately a trailer wiring converter module like #118426 can go bad at any time without any notice. It is rare, but can happen. The module has a circuit board that will work great until it doesn't and if that goes, it can do some odd things…
view full answer...The pulsing red light on the Noco Genius part #329-GENIUS1 indicates that the battery is less than 75 percent charged. To get rid of it you need to continue letting it charge. I attached a picture that has this explained as well.
view full answer...Virtually no manufacturer actually wants/encourages owners to modify their products; this is certainly true for Thule and their various cargo boxes. My contact there advised that Thule cannot recommend making such a change although I do understand…
view full answer...So what you need is the correct ball mount rise/drop that will allow your trailer to be towed level. If you did need a ball mount with a 6 inch rise we have the #C45090 though. For hitch balls you would want part #63845 for a 2 inch ball or #63847…
view full answer...Yes, we do offer replacement hardware for the Curt Trailer Hitch Receiver part #C13068 which is a fit for a 1999 - 2017 Honda Odyssey, you'd simply need to order the Replacement Hitch Hardware Kit part #RHK.
view full answer...The Curt 2-inch Class III hitch #C13068 is a confirmed fit for your 2014 Honda Odyssey and this hitch includes the required mounting hardware. The installation instructions, which are linked for your reference, detail the included fasteners and other…
view full answer...The Thule J-Style Kayak carriers like the Thule Hull-A-Port #TH834 that fit your Thule AeroBlade Load Bars will absolutely fit the crossbars of the Yakima Rack and Roll Trailer - 78" #Y08107 or the Yakima Rack and Roll Trailer - 66" #Y08106…
view full answer...The external measurements of the Thule Canyon roof rack #TH859XT are 50-1/4 inches long by 41 inches wide by 6 inches tall. The internal measurements are 39 inches long by 40 inches wide by 5 inches tall. The usable interior dimensions are 39 inches…
view full answer...First, I would say if there is any question on the road worthiness of the trailer, take the steps to correct it. Better safe than sorry. Some trailers have wheels that are hub-centric, the wheel is centered on the hub using the center pilot holes.…
view full answer...