Custom Fit 2006 Honda Accord Accessories

Yes, they'll work fine together! The Curt 2 Bike Platform Rack item #C18085 works with class I hitches like the Draw-Tite item #24787. No, the use of the Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories item #18050 is not…

If you are getting a no trailer connected warning on your Tekonsha Prodigy P3 #90195 you may have a corroded or dirty connector which is hampering the connection. Check the vehicle and trailer plug to see if there is any type of corrosion or dirt…

Simple fix! Just order a replacement key. Next to the key slot on the lock cylinder will be a key number engraved into the cylinder. It'll be the letter N followed by 3 digits. For example, if the lock has 'N030' engraved on…

I am not sure why there would be noise coming from the #C11327 installation concerning the tow hook on your 2006 Accord. The installation does require the exhaust hanger removal by taking off the rubber isolators. They are installed after the hitch…

There are only so many different hitch designs for any given vehicle. For your 2007 Honda Accord the Draw-Tite hitch #24787 and Curt hitch #C11327 have the same basic design. This is because of where the best places are on the vehicle to attach a…

It sounds like you have a Thule bike rack intended to be used for 2" hitches but only have a 1-1/4" receiver on your SUV's hitch. If you have a 1-1/4" receiver opening you only have a Class I or Class II hitch which is going to…

For your 2006 Honda Accord sedan, I recommend using the Draw-Tite Sportframe Trailer Hitch Receiver #24787 you referenced. It is only a Class I which is all that is allowed for your vehicle, so your max capacity is 200 lbs. Based on my research the…

I can give you a list of the tools needed to install the Draw-Tite Sportframe Trailer Hitch Receiver #24787. Per the instructions, which are linked below, you will need an 11/16" and 3/4" socket wrench, as well as 9/16" drill bit. I…

We have not had the opportunity to install the Curt Hitch #C11290 on a 2003 Acura TL, so this measure is not available. If you could measure from the hitch pin hole to the outer most part of the bumper with the hitch that you currently have, I can…

We unfortunately do not have exactly the spring you are looking for. What I recommend is getting the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long #SP-178275 and moving your rear hanger forward because you will be…

The only difference between the Flat and Radius end slipper springs is the shape of the end of the spring with the radius having an arch and the flat being flat as you can see in the included pictures of the Radius End #SP-179275 and Flat End #e29SR.…

I reached out to my contact at Yakima and shared your photo. They said it is either a BlackTop 18 or 21 cargo box. I've attached the installation instructions to assist. I've attached a link to all of our Yakima replacement parts to help if…