Custom Fit 2006 Dodge Dakota Accessories

Hey Steve, what you would want is the Timbren kit part #TDDR05 that fits your 2006 Dodge Dakota. This will give your truck additional rear suspension support so that it doesn't sag when towing your travel trailer.

The Hopkins Plug-in Simple Brake Wiring Adapter - Dodge, part #HM47755 is designed to be used on vehicles that have a factory tow-package. Since your 2005 Dodge Dakota does not have the tow package, you will need to connect each of the wires…

Since the Extang Tuff Tonno you have on your 2015 Chevy Silverado 1500 5-1/2 foot bed is the part #EX14445 the correct replacement tarp is the part #EX13445.

In order to safely tow your 2006 Dodge Dakota Pickup behind your motor home, you will need a hitch on your motor home, base plates on the front of your vehicle, a tow bar and a few accessories. This Curt Front Mount Trailer Hitch part #31228 is…

In regards to installing the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs part #APT4 with the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles part #SP-169275, you'd just need to mock everything up on the trailer first before welding.…

The position of the axle should dictate the position of the springs and hangers not the other way around. With that being said, in order to determine proper placement of the hangers you will want to take the the distance between the two eye holes on…

There is a reason for your sway problem. You may have too little tongue weight for the boat trailer to be stable behind the RV. If the boat is lightweight and the engine is on the back this can cause the tongue weight to be reduced and this will…

There are 5 items you will need to flat tow a vehicle: base plates, tow bar, safety cables, lighting, and supplemental braking. With the tow bar and base plates out of the way we can focus on the rest. But before you do anything else consult the…

The port under your hood that the Hopkins Plug-in Simple Brake Wiring Adapter #HM47755 you referenced plugs into will be under the dash just to the right of the emergency brake. Check out the picture I attached that shows exactly where it is. You…

For a 2006 Dodge Dakota that does not have the factory tow package you will need to hardwire in a trailer brake controller. The first thing you will need is a 4-Way trailer wiring harness, #118323. If the truck already has a 4-Way you will not need…

You will first need a tow bar and base plates. The tow bar will fit into the receiver of the motorhome, and attach to the base plates once they are installed on the Dakota. The Roadmaster Falcon 2, part #RM-520 is a good mid-priced option. Either…

You will not need to add any diodes or other modules to prevent hyperflashing or any other bizarre taillight behavior when you install this Optronics Tail Light #STL78RB on your trailer. If you were installing LED tail lights on a vehicle and…